|
| Manufacturer |
Tripp Lite |
| Manufacturer Part Number |
APS1250 |
| Manufacturer Website Address |
www.tripplite.com |
| Product Name |
PowerVerter APS 1250W Inverter |
| Marketing Information |
PowerVerter
APS 1250W Inverter 3-function DC-to-AC inverter with automatic
line-to-battery transfer and integrated charging system serves as an
extended run UPS, a standalone power source or an automotive inverter.
Supplies up to 1250 watts of continuous 120V AC power to 2 AC outlets
from any 12V battery or automotive DC source. When AC cable is
connected to a live wall socket, commercial power passes through to
connected equipment and the battery set is recharged via 3 stage, 30
amp charging system.
A DoubleBoost feature provides up to 200%
of the continuous output for up to 10 seconds, providing the extra
power needed to cold start heavy-duty tools and equipment. An OverPower
feature delivers up to 150% of the continuous output for up to 1 hour.
|
|
| Plug/Connector Type |
NEMA 5-15P |
| Receptacles |
2 x NEMA 5-15R |
| Protection |
Overload Protection - Resettable circuit breaker |
|
| Input Voltage |
12V DC
120V AC
|
| Input Voltage Range |
12 to 15 V DC |
| Output Voltage |
120V AC ±5V AC Nominal |
| Frequency |
60 Hz ±0.3Hz |
| Input Current |
127 A @ 12V DC
12 A @ 120V AC
|
| Load Capacity |
1250W / 2500W |
| Waveform Type |
Pulse-width Modulated Sine Wave |
| Switching Time |
6 ms |
|
| Temperature |
0 °C (32 °F) to 40 °C (104 °F)
Operating |
| Humidity |
0% to 95% Non-condensing Relative Humidity |
|
| Color |
Black |
| Power Cord/Cable |
6ft |
| Dimensions |
7" Height x 8.75" Width x 9" Depth |
| Shipping Dimensions |
12.5" Height x 11" Width x 10.75" Depth |
| Weight |
28 lb |
| Shipping Weight |
32 lb |
|
| Additional Information |
Frequency control for operating stability
Coated internal circuit boards offer continuous operation in
humid environments
Advanced 30 amp, 3-stage battery charger and selector switch
for gel or wet cell batteries
6 diagnostic LEDs indicate AC present, on battery, charge
rate, overload & battery voltage level (high, medium & low)
Functions as an extended run UPS system, standalone power
source and automotive inverter
AC input cord and auto-transfer to enable battery charging
and automatic UPS support for blackouts & brownouts
RJ45 port allows connection of APS/PowerVerter Remote Switch
(manuf# APSRM4)
Switch allows user to select between off, auto-invert/remote
and charge-only settings
Configuration switches to allow the user to select the high
and low voltage
|
| Package Contents |
PowerVerter APS 1250W Inverter
Instruction manual with warranty information
|
|
| Standard Warranty |
1 Year(s) |
INTERNATIONAL GROUND SHIPPING: 
