Product Description:
The PEX312PUSB 3
Port PCI Express (12V) Powered USB Card allows you to add three Powered
USB (USB PlusPower) ports to any standard form-factor sized computer,
using an available PCI Express Slot.
Drawing power from either the PCI Express slot or the computer power
supply, the PEX312PUSB (3 Port Low Profile PCI Express 12V Powered USB
Card) provides up to 3A of current to each connected device, allowing
for up to three Powered USB devices to be installed at the same time.
Plus, the PEX312PUSB can be connected to the corresponding accessory
daughter board PUSBADAP (2 Port Low Profile 12V/24V Powered USB Adapter
Card), to create two additional Powered USB ports, but does not require
a second PCI Express slot.
Features
- 3 external 12V Powered USB Connectors
- Powered from either the 1x PCI Express slot or the Power
Supply of the P.C. with a standard LP4 connection
- Supplies power and data signals over hot-plugging
USB cable
- Can be linked to a daughter board or stand alone
- Backwards compatible with USB 1.1 and 2.0 standards
and allow for hot-plugging
- No external power is required
- Cable locking mechanism
- Two
internal USB connections can be used to expanded to the daughter board
by connecting the USB header on the Main Board to the USB header on the
daughter board using a USB cable
- Maximum data transfer rate: 480 Mbps
Specifications
| Warranty |
Lifetime warranty |
| Product
Length |
4.75
in [120.6 mm] |
| Carton
Quantity |
50 |
| Product
Width |
2.73
in [69.22 mm] |
| Bracket
Type |
Standard
Profile |
| Connection |
1x
lane PCI Express Connection |
| Maximum
data transfer rate |
480
Mbps |
| Connectors |
3x
12V Powered USB male connectors |
| 1x
LP4 Connector |
| 1x
Internal USB (9 pin) Header Connector for expansion |
| 4x
Jumper Connector |
| Chipset |
NEC
D720101GJ |
| OS
Support |
Windows
2000/ME/2003/XP/Vista |
| Note |
Approximately
100W of spare power is required from the power supply when peripheral
devices are connected and running |
|
INTERNATIONAL GROUND SHIPPING: 
