|
| Manufacturer |
APC Power Conversion Corp. |
| Manufacturer Part Number |
AP9225 |
| Manufacturer Website Address |
www.apc.com |
| Product Name |
AP9225 Power Distribution Unit |
| Marketing Information |
Remotely control power to individual outlets and
monitor the aggregate power consumption via local and remote displays. |
|
| Input Receptacles |
1 x NEMA 5-15P |
| Output Receptacles |
8 x NEMA 5-15R |
| Protection |
Overload Protection
Leakage Current Protection
Overcurrent Protection
Password Protection
|
|
| Input Voltage |
100 to 140V AC |
| Output Voltage |
120V AC |
| Current |
12A Input Current
12A Output Current
|
| Frequency |
50 or 60Hz |
| Load/Power Rating |
1440 |
| Circuit Breaker |
1 x 15A |
|
| Management |
- Remote Management Interfaces:
- Web Interface
- Console Control nterface
- SNMP
- Remote Management Capabilities |
|
| Status Indicators |
Basic port:
- On: The Outlet is on.
- Off: The Outlet is off.
- Mostly off: The Outlet is scheduled to turn on.
- Mostly on: The Outlet is scheduled to turn off.
- Flashing green: The outlet cannot turn on due to an Environmental
alarm.
MasterSwitch plus Status:
- Flashing green: The UPS is in Sleep mode.
- Steady green: The UPS is operating Normally.
- Steady red: The UPS has experienced an AC Fail condition(UPS is On
Battery).
- Flashing red: The UPS has asserted a Low Battery indication.
- Flashing green and red: MasterSwitch Plus is unable to communicate
with the UPS.
Management Card Status:
- Off: MasterSwitch Plus has no power.
- Solid green: MasterSwitch Plus has valid network settings.
- Flashing green: MasterSwitch Plus does not have valid network
settings.
- Flashing red slowly: MasterSwitch Plus is making a BOOTP request.
- Solid red: A hardware failure has been detected by MasterSwitch Plus
Management Card Link-RX/TX:
- Constant Green: MasterSwitch Plus is connected to a functioning
network.
- Flashing Green: MasterSwitch Plus is receiving data packets from the
network.
- Off: The device(s) that connects MasterSwitch Plus to the network,
whether a router, hub, or concentrator, is off or not operating
correctly. |
|
| Interfaces/Ports |
1 x RJ-45 Network Port
1 x RS-232 Console Port
|
|
| Temperature |
32 to 113°F (0 to 45°C) Operating
5 to 149°F (-15 to 65°C) Storage
|
| Humidity |
0 to 95% Relative Humidity Operating
0 to 95% Non-condensing Relative Humidity Storage
|
| Altitude |
0 to 10000 ft Operating
0 to 50000 ft Storage
|
|
| Color |
Beige |
| Form Factor |
1U 19" Rack-mountable |
| Power Cord/Cable |
1 x 15ft Power Cord |
| Dimensions |
2.13" Height x 17" Width x 6.5" Depth |
| Shipping Dimensions |
2.75" Height x 19" Width x 13.5" Depth |
| Weight |
7.75 lb |
| Shipping Weight |
12 lb |
|
| Package Contents |
- CD with software
- DB9-DB9 Cable
- Rack Mounting Brackets
- User Manual |
| Additional Information |
- Units per Pallet: 100.0
- Boot-P support
- Defineable Outlet Control
- Flash Upgradeable
- Multiple User Support
- Power Sequencing |
| Certifications & Standards |
- CSA
- CSA 22.2 No. 950
- DOC/Industry Canada
- EN 55022 Class A
- EN 55024
- EN 55082
- UL 1950
- UL Listed
- VCCI
- FCC Part 15 Class A
- DOC Class A |
INTERNATIONAL GROUND SHIPPING: 
