Operation Modes for Embedded Applications
The WE-2100T supports Real COM, TCP server, TCP client, UDP, and RFC 2217 operation modes, which are designed to fulfill the requirements of embedded module applications. Complete driver support for Real COM mode is included and easy to install.

On-site Configuration with Serial Command Mode
• Easy on-site configuration of network settings
• Simple command frame format
• Comprehensive command set for serial and network configuration
• Easily switch between software and hardware triggers
• Software reset

	Easy IEEE802.11a/b/g connectivity for one serial device
	Real COM, TCP server, TCP slave, UDP, and RFC 2217 operating modes
	Windows COM, Linux Real TTY drivers

Standard Compliance IEEE 802.11a/b/g Transmit Power 5.15 to 5.25 GHz: 15 dBm @ 6 Mbps; 12 dBm @ 54 Mbps 5.725 to 5.825 GHz: 15 dBm @ 6 Mbps; 12 dBm @ 54 Mbps 2.412 to 2.483 GHz: 17 dBm @ 6 Mbps; 15 dBm @ 54 Mbps 2.412 to 2.472 GHz: 18 dBm @ 1 to 11 Mbps Receive Sensitivity 5.15 to 5.25 GHz: 6 Mbps @ -90 dBm; 54 Mbps @ -72 dBm 5.725 to 5.825 GHz: 6 Mbps @ -89 dBm; 54 Mbps @ -72 dBm 2.412 to 2.483 GHz: 6 Mbps @ -90 dBm; 54 Mbps @ -73 dBm 2.412 to 2.472 GHz: 11 Mbps @ -87 dBm; 1 Mbps @ -94 dBm Transmission Rate 802.11a: 54 Mbps 802.11b: 11 Mbps 802.11g: 54 Mbps Data Communication Distance Up to 100 meters in open areas Wireless Security AES, WEP 64/128-bit, WPA, WPA2, 802.11i 802.11i Authentications TLS, PEAP/GTC, PEAP/MD5, PEAP/MSCHAPv2, TTLS/PAP, TTLS/ CHAP, TTLS/MSCHAP, TTLS/MSCHAPv2, TTLS/EAP-MSCHAPv2, TTLS/EAP-GTC, TTLS/EAP-MD5, LEAP Channels North America: CH1 to CH11, 5150-5825 MHz Europe: CH1 to CH13, 5150-5875 MHz Japan: CH1 to CH14, 5150-5350 MHz Antenna Connector: Reverse SMA Network Mode: Infrastructure mode (a/b/g), Ad-Hoc mode (b/g Antenna Gain: 2 DBi

Ethernet Interface

Ethernet 10/100 Mbps, Auto MDI/MDIX Protection Built-in 1.5 KV magnetic isolation

Network Interface

Wireless or Ethernet The WE-2100T will detect the Ethernet linkage at boot-up. If an Ethernet linkage is detected, the Ethernet interface will be active; if the linkage is not detected, the WE-2100T will choose wireless as communication interface.You can also fix the interface by configure by with software.

Serial Interface

Number of Ports 1 data port, 1 serial console port Interface TTL Parity None, Even, Odd, Space, Mark Data Bits 5, 6, 7, 8 Stop Bit(s) 1, 1.5, 2 Flow Control RTS/CTS, XON/XOFF, DTR/DSR Baudrate Range 50 to 921.6 Kbps (standard baudrates), 250 and 500 Kbps (nonstandard baudrates)

Configurable GPIO

9 software configurable GPIOs

CPU Architecture

ARM based 32-bit processor, 200 MHz computation frequency

Management and Configuration Interface

* Windows utility * Web console * Telnet console * Serial console * Serial command mode (configure by data port)

Software Features

Operating Modes: * TCP Server * TCP Client * Real COM * UDP * RFC2217 Protocol Support ICMP, IP, TCP, UDP, DHCP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, SSH, HTTPS Windows Utility OS Support Windows 98/ME/2000/XP/2003/Vista OS Driver Support Windows 98/ME/NT/2000/XP /2003/XP x64/2003 x64/Vista COM driver, Linux Real TTY driver, SCO Unix, SCO OpenServer 5, UnixWare 7, UnixWare 2.1.x, SVR4.2, QNX

Environmental Conditions

Operating Temperature 0 to 55°C (32 to 131°F), 5 to 95% RH Storage Temperature Storage Temperature: -20 to 85°C (-4 to 185°F), 5 to 95% RH

Power Requirements

Power Input 3.3V ± 5% Power Consumption 921.6 Kbps (full speed): 720 mA Idle: 720 mA Ethernet mode: 480 m Inrush current: 2100 mA

Surface Temperature (at full speed of 921.6 Kbps)

Environment Top Panel Bottom Panel 25°C 46.7°C 45.7°C 55°C 60°C 68.4°C

Regulatory Approvals

EMC CE EN550022 Class A FCC Part 15, Subpart B, Class A Safety EN60950, CUL, TUV Wireless CE ETSI EN 301 489-17 CE ETSI EN 301 489-1 FCC Part 15, Subpart B, Class A FCC Part 17, Subpart B, Class A

Packing

Dimensions 54 x 40 x 13.3 mm Material Metal

Warranty

5 years Standard Moxa Product Warranty