Being an ETX compatible module, the ETX-821 was designed specially
to improve the quality and speed of your product development. It will
provide a more compact size and more flexibility for your various
applications.
All of AAEON's ETX modules have a standard form factor and a
standard connector layout that carry a specified set of signals. By
adopting this standardization, the designers can create a single system
of "baseboards" that can accept present and future ETX modules. The
baseboard designer can optimize exactly how each of these functions is
implemented physically. Designers can place connectors precisely where
needed for the application on a baseboard designed to optimally fit a
system's packaging.
System
- Form Factor
ETX
- Processor
Intel Pentium M/ Celeron M processors
- System Memory
200-pin DDR SODIMM x 1, Max. 1 GB (DDR 200/266)
- Chipset
Intel 852GM + ICH4
- I/O Chipset
ITE IT8712
- Ethernet
Intel 82562ET, 10/100 Base-TX
- BIOS
AWARD 512KB FLASH ROM
- Wake On LAN
Yes
- Watchdog Timer
Generates a time-out system reset
- H/W Status Monitoring
Supports power supply voltages fan speed and temperature
monitoring
- Expansion Interface
32-bit PCI x 4, 8-bit/16-bit ISA
- Power Requirement
+5V/AT/ATX
- Power Consumption (Typical)
Celeron: 1.1GHz, DDR333 512MB
2.10 A@ +5V, 0.1 A@5VSB, 0.30 A@+3.3V
- Board Size
4.5" (L) x 3.74" (W) (114 mm x 95 mm)
- Gross Weight
0.66 lb (0.3 Kg)
- Operating Temperature
32oF~ 140oF (0oC ~ 60oC)
- Storage Temperature
-40oF~176oF (-40oC~80oC)
- Operating Humidity
0% ~ 90% relative humidity, non-condensing
- MTBF (Hours)
118,614
Display : Supports CRT/ LCD, CRT/TV,
LCD/TV Dual Simultaneous/ Dual Independent Display
- Chipset
Intel 852GM
- Memory
Shared memory up to 64MB
- Resolutions
Up to 1600 x 1200 (UXGA) @ 85Hz for CRT
Up to 1280 x 1024 (SXGA) for LCD
- LCD Interface
Up to 18/36-bit dual channel LVDS
- TV-out
Supports NTSC and PAL standard (Chrontel CH7009)
I/O
- PATA/SATA
PATA port x 2
- Audio
AC97 CODEC (Realteck ALC655)
- USB
USB 2.0 port x 4