MODEL- ANTECP182          VENDOR- ANTEC INC.
    
FEATURES- Performance One P182 Advanced Super Mid-Tower Case- Black
       Introducing the P182, the newest edition in Antec's continually 
        improving Performance One design. More innovations have been built 
        in, such as an external fan control for the top and rear fans, a 
        special gun metal black finish, cable organizers and even rubber 
        grommeted ports for externally mounted liquid-cooling radiators. 
        All of these improvements build upon the great features of the 
        original P180: the triple layer side panels and door design, and 
        the upper and lower chamber structure to isolate power supply heat 
        from the rest of your components. The P182 truly is the new 
        standard by which all other performance cases will be measured.
    Includes Tower Case, set of screws and motherboard standoffs, 
      Installation manual.
* Attractive gun metal black finish 
* Dual chambers structure: The power supply (not included) is located in 
  the lower chamber to isolate heat from the system and lower system noise.
* Special three-layer side panels and front door (aluminum, plastic, 
  aluminum) dampen system generated noise, making this one of the quietest 
  cases available.
* 0.8mm cold rolled steel for durability used through the majority of the 
  chassis, 1.0mm cold rolled steel around the 4x HDD area.
* Double hinge door designed to open up to 270 degrees
* Rubber grommeted ports on the rear for liquid-cooling tubes allow you to 
  mount external liquid-cooling hardware.
* Cable organizers behind motherboard tray minimize cable clutter.
     
  -- SPECIFICATIONs -----------------------------------
MAINBOARD    - Accepts standard ATX motherboards (12" x 9.6")
DRIVE BAYS   - External: (4) 5.25"
                         (1) 3.5"
               Internal: (6) 3.5"
EXPANSION    - (7) Expansion slots
COOLING      - (1) rear 120mm Tricool fan (standard) 
               (1) top (standard) 120mm TriCool Fan
               (1) lower chamber (standard) 120mm TriCool Fan
               (1) front (optional) 120mm fan
               (1) middle 120mm fan (optional) to cool the VGA card
               External fan control on the rear panel for the top and rear 
                 fans in the upper chamber.
CONNECTORs   - (2) USB 2.0 ports
               (1) IEEE-1394/FireWire port
               (2) Audio jacks
POWER SOURCE - Not included
DIMENSIONS   - 8.1"w x 21.3"h x 19.9"d          WT.- 14.1 lbs.
www.antec.com