MODEL- EM9100             VENDOR- CREATIVE LABS
    
FEATURES- Creative Professional PS12 Precision Subwoofer
       E-MU's PS12 Precision Subwoofer features a premium 12" driver and 
        custom discrete 200 watt MOSFET amplifier in a compact, sealed 
        cabinet design to deliver superior transient response and low 
        distortion. From nuanced acoustic performances to extreme club 
        mixes, the PS12 delivers linear frequency response down to 22Hz. 
       Whether used in conjunction with E-MU's PM5 Precision Monitors or 
        other speakers, the PS12 is perfect for both stereo and surround 
        applications with professional features like balanced/unbalanced 
        inputs and outputs; high-pass, low-pass and subsonic filters; 
        variable level and phase controls; overload protection; and a 
        footswitch input that allows effortless bypassing of the subwoofer 
        and high-pass filter during mixdown.
    Includes E-MU PS12 Precision Subwoofer, Power Cord and Owner's Manual.
* Subwoofer Low-Pass Filter Frequency
   Controls the low-pass filter cutoff frequency for the signal being fed
   to the Subwoofer. 55Hz to Flat (no filter).
* Balanced Inputs
   Right and Left Neutrik Combination XLR/TRS balanced analog input 
   connectors.
* Unbalanced Inputs
* Foot Switch Connector
   1/4" Latching Foot Switch connector for easy by-passing of the subwoofer 
   and high-pass filter. (Foot Switch not included).
* Subwoofer Status LED
   Lights in green when the subwoofer is active, red when subwoofer is 
   muted.
* Phase
   Controls the phasae of the signal being fed to the subwoofer. Zero to
   180 degrees.
* Level
   Controls the level of the signal being fed to the subwoofer.
* Satellite Output High-Pass Filter Frequency
   Controls the high-pass filter cutoff frequency for the signal being fed
   to the satellite speakers. 40Hz to 135Hz
* Balanced Satellite Outputs
* Unbalanced Satellite Outputs
* High-Pass Filter Status Switch
   Normal: High-pass filter on (except when the Foot Switch is used). Off:
   High-pass filter is turned off and the full unfiltered signal is sent to
   satellite outputs.
* High-Pass Filter Status LED
   Lights in green when the high-pass filter is active, red when the high-
   pass filter is bypassed using the Switch or Foot Switch.
    
  -- SPECIFICATIONs -----------------------------------
TECHNOLOGY          - Front firing, acoustic suspension active reference 
                        subwoofer.
FREQUENCY RESPONSE  - 22Hz to 135kHz (+/- 2.5dB) 
                      30Hz to 100Hz  (+/- 1.5dB)
SOUND PRESSURE LEVEL- Maximum (short term) 
                        =103dB SPL @ 1m @ 60Hz
DRIVER              - Polymer-Laminated Cone with Butyl-rubber surround  
                      Long-throw with high temperature voice coil 
                      Size: 305mm (12") 
CONNECTIONS         - (2) Balanced Neutrik Combination XLR/TRS Inputs 
                      (2) Unbalanced RCA Inputs 
                      (2) Balanced XLR Satellite Outputs  
                      (2) Unbalanced RCA Satellite Outputs 
                      (1) 3-pin power connector 
                      (1) Subwoofer/Hi-Pass Filter Bypass Footswitch Input
                            (Foot Switch not included) 
CROSSOVER NETWORK   - Sub-Sonic Rumble filter: 15Hz @ 12dB/octave 
                      Low-Pass Filter (to subwoofer): Variable frequency 
                        Linkwitz-Riley 4th order (55Hz-135).
                      Hi-Pass Filter (to satellite outputs): Variable 
                        frequency Linkwitz-Riley 2nd order (40Hz-135Hz).
                      Input impedance Balanced: 20KOhms  
                                      Unbalanced: 100KOhms  
AMPLIFIER           - Type: custom discrete MOSFET  
                      Power: 200W RMS into 4 ohms continuous  
                      Signal-to-Noise Ratio, referred to full output:
                        >102dB A-weighted.
                      Distortion: THD <0.1%
POWER SOURCE        - Input Voltage: 100V-120V,50/60Hz Input Current: 2.5A
                      Input Voltage: 220V-240V,50/60Hz Input Current: 1.25A
                      Auto power-On/Standby (15-minute standby delay)
DIMENSIONS          - 14.2"w x 15.1"h x 15.3"d      WT.- 43 lbs. 
www.creativelabs.com