Product Description:
The ATA Card contains an ATA/IDE controller and one or more flash
memory devices. Smart Modular ATA product line is offered in a UL
approved Type I housing with a 68 pin connector. On Board ATA/IDE
controller interfaces with a host system allowing data to be written to
and read from the flash memory devices.
SMART further increases the reliability of its ATA product offering -
yielding greater than 2 Million Progem/ Erase cycles for most
applications - by using Single Level Cell NAND Flash technology which
betters comparable Multi Level Cell technology by a factor of 10X in
reliability and 2X in speed
Features:
PC Card Standard Release 8 Compliant
CIS (Card Information Structure) programmed into 256 Bytes of
Attribute Memory
Supports Memory Mapped, I/O Mapped, and True IDE Interface Modes
Supports up to PIO Mode-4 and up to Multi-word DMA Mode-2
On-Board Wear Leveling
RoHS Compliant
Specification :
Physical Capacity : 64MB
Device Density : 512Mb
SM222 Controller
Read Data Rates, Sustained : 10MB/s
Write Data Rates, Sustained : 6MB/s
Host Interface Transfer Rate : 16MB/s
MTBF : >2,500,000 hours
Data Retention : 10 years
Endurance : >2,000,000 program/erase cycles
Shock : 50G max. @ 11mS
Vibration : 15G peak to peak
Humidity : 5% to 95%
Altitude : up to 80,000 ft.
Low power consumption : operates at 5.0V
(3.3V drive is optional)
|
INTERNATIONAL GROUND SHIPPING: 
