Optical Fiber Ethernet Connection
The NPort 5650 series is the first series of device servers that includes both copper and optical fiber models for the Ethernet connection. The fiber models come with a single-mode or multi-mode connection.

Connect up to 16 RS-232/422/485 Serial Devices to the Internet
The NPort 5650 provides a convenient and transparent way to set up serial to Ethernet connections that protect your current hardware investment, but also leave room for future network expansion. Perform some simple configuration tasks, and you'll be ready to network your serial devices in no time. The NPort 5650 can transparently transmit data bi-directionally between the serial and Ethernet interfaces. You can either control all of your serial devices from one central location, or distribute the management hosts around the network.

Useful LED Indicators
The system LED, serial Tx/Rx LEDs, and Ethernet LED on the NPort help field engineers analyze field problems, and provide a simple way to ease monitoring tasks. NPort 5650's LEDs not only indicate current system and network status, but also assist field engineers in monitoring the status of attached serial devices.

Easy-to-use LCM (Liquid Crystal Module) interface for IP address configuration

Standard 19-inch rack-mountable

Auto-detecting 10/100 Mbps Ethernet

16/8 RS-232 or RS-422/485 ports

Surge protection for all serial signals (15 KV ESD)

Supports TCP Server, TCP Client, UDP, and Real COM Modes

Supports web and Telnet consoles

Supports SNMP MIB-II for network management

LAN

Ethernet 10/100 Mbps, RJ45, Auto MDI/MDIX Protection Built-in 1.5 KV magnetic isolation

Serial

Interface RS-232/422/485, 8-pin RJ45 Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, GND, DCD RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND RS-485 Data Direction Control Patented Automatic Data Direction Control (ADDCâ„¢) Serial line protection 15 KV ESD for all signals Power line protection 1 KV Burst (EFT), EN61000-4-4 0.5 KV Surge, EN61000-4-5

Optical Fiber

Distance Multi mode: 0 to 2 km, 1310 nm (62.5/125 µm, 500 MHz*km) Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km) Min. TX Output Multi mode: -20 dBm Single mode: 0 to 40 km, -20 dBm Max. TX Output Multi mode: -14 dBm Single mode: 0 to 40 km, 0 dBm Sensitivity -36 to -32 dBm (Single), -34 to -30 dBm (Multi)

Advanced Built-in Features

HMI LCM display with four push buttons Buzzer Yes Real-Time Clock Yes Watch Dog Timer Yes

Serial Communication Parameters

Parity None, Even, Odd, Space, Mark Data bits 5, 6, 7, 8 Stop bit 1, 1.5, 2 Flow control RTS/CTS, DTR/DSR (NPort 5610 only), XON/XOFF Speed 50 bps to 921.6 Kbps Software Features Protocols ICMP, IP, TCP, UDP, DHCP, BootP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, PPP, SLIP, RTelnet, RFC2217 Utilities NPort Administration Suite for Windows 95/98/ME/NT/2000/XP/2003 OS Driver Support Windows 95/98/ME/NT/2000/XP/2003/XP x64/2003 x64 COM driver, Linux Real TTY driver, SCO Unix, SCO OpenServer 5, UnixWare 7, UnixWare 2.1.x, SVR4.2/QNX Configuration Web/Telnet console, or Windows utility

Power Requirements

Power Input 100 to 240 VAC, 47 to 63 Hz Power Consumption NPort 5650-8/16: 158 mA @ 100 VAC, 102 mA @ 240 VAC NPort 5650-S-SC-8/16: 164 mA @ 100 VAC, 110 mA @ 240 VAC Port 5650-M-SC-8/16: 174 mA @ 100 VAC, 113 mA @ 240 VAC

Mechanical

Material SECC sheet metal (1 mm)

Environmental

Operating Temperature 0 to 55°C (32 to 131°F), 5 to 95% RH Storage Temperature -20 to 75°C (-4 to 167°F), 5 to 95% RH

Regulatory Approvals

EMC CE: EN55022 Class A/EN 55024 IEC 61000-4-12 (for NPort 5610-16, NPort 5610-8-48) FCC: FCC Part 15 Subpart B Class A Safety UL: UL60950-1, TÜV: EN60950-1 Warranty 5 years