MODEL- JJ-P20212-S6       VENDOR- SIIG, INC
   
FEATURES- CyberSerial Dual Plus- Single
       Two serial (16650) ports, Universal PCI card design with built-in 
        64-byte FIFO buffers to work in 32-/64-bit, 3.3V/5V PCI and PCI-X 
        slots. RoHS compliant!
    Includes CyberSerial Dual Plus PCI, Driver CD and Installation guide.
* Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots 
* Two high-speed 16650 UART serial ports (9-pin) support data rate up to 
  460 Kbps.
* Will work as standard RS232 port or with 5V or 12V power output for 
  devices that require power (such as handheld scanners, table scanners, 
  POS displays, etc.). Configurable via jumpers with silk-screened settings 
  on PCB.
* RoHS compliant 
* IRQ sharing reduces IRQ conflicts 
* Built-in 64-byte FIFO buffers dramatically increase data transmit/receive 
  speed, especially under Windows multitasking environment.
* 4-layer PCB board: separate layers for data & grounding. Greatly reduces 
  signal noise & loss. Delivers more reliable high-speed data transfers.
* Enhanced bracket design to prevent bending. Connected to PCB with 
  washered screws for a more secure connection.
* Supports 3.3V operation with 5V tolerance 
* Conforms to PCI v2.2 universal card standard. PCI-X & 64-bit compatible.
* Supports PME # (Power Management Event). Allows device to request a 
  change in system power state (wake up system).
* Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR 
  (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers 
  much improved noise suppression & achieves higher levels of performance/
  reliability.
* Use SMT (Surface Mount Technology) type crystal. Offers cleaner design 
  than traditional DIP-type crystal. Provides greatly improved grounding, 
  which reduces EMI emission & improves performance/reliabiilty.
    
  -- SPECIFICATIONs -----------------------------------
INTERFACE/BUS- 32-bit PCI 
CHIPSET      - CyberPro
CONNECTORs   - (2) DB-9  RS-232 Serial ports
                   High-speed 16650 UART with 32-byte transmit/receive FIFO
                     buffers. 
O/S SUPPORT  - Windows 95/98/98 SE/ME/NT4.0/2000/XP/Server 2003 
APPROVALS    - FCC B, CE
REQUIREMENTS - Pentium or equivalent computer 
               available 32-/64-bit PCI or PCI-X slot 
               Windows 95 or later 
             www.siig.com  
                                                      support@siig.com