MODEL- SC-SA4011-S2       VENDOR- SIIG
    
FEATURES- Serial ATA 4-Channel PCI
       High-speed 4-channel PCI-to-Serial ATA host adapter. RoHS compliant.
       Supports up to four Serial ATA hard disk drives with high-speed data 
        transfer rates up to 150MB/sec.
       The thin, flexible Serial ATA cable is easier to route inside a PC.
    Includes Serial ATA 4-channel PCI board, (2) Serial ATA cables 
      (1 meter), Dual-connector Serial ATA power cable, Driver software 
      and User s manual.
* Breaks the 137GB barrier! Supports various brands of large capacity 
  Serial ATA hard disk drives.
* Coexists with Ultra ATA controller and allows you to connect up to four 
  Serial ATA hard disks.
* High quality SATA cable and 15-pin SATA power cable required for SATA 
  hard disk installation are included! 
* Lower pin count and voltage requirement, plus better cabling over 
  traditional Parallel ATA make Serial ATA the controller of the future.
* RoHS compliant 
* Supports 32-bit wide PCI bus at 66MHz and data transfer rates up to 
  150 MB/s (1.5Gb/s).
* Works in both 32-bit or 64-bit PCI slots 
* Features independent 256-byte FIFOs per channel for host reads and writes
* Features Watch Dog timer for fault resiliency and flash memory for future 
  BIOS updates.
    
  -- SPECIFICATIONs -----------------------------------
INTERFACE/BUS- 32-bit PCI v2.2, 66MHz
               Works in 32-bit or 64-bit PCI slot
CONNECTORs   - (4) Serial ATA ports
TRANSFER RATE- up to 150 MB/s
REQUIREMENTS - Pentium or equivalent PC 
               available PCI slot 
               Windows 98/98SE/NT4.0/ME/2000/XP/Server 2003 
APPROVALS    - FCC Class B (DoC) & CE 
             www.siig.com
                                                      support@siig.com