MODEL- JJ-E10011-S2       VENDOR- SIIG
     
FEATURES- CyberSerial PCIe
       One-port (9-pin) serial (16550 UART) x1 PCI Express card.
       PCI Express 1-lane (x1) adapter works with PCI Express slots with 
        different lane width.
       Installs in any available PCI Express slot.
       One high-speed 16550 UART serial port (9-pin) supports data rate up 
        to 230 Kbps.
       Works as standard RS232 port or with 5V or 12V power output for 
        devices that require power (such as handheld scanners, table 
        scanners, POS displays, etc.). Configurable via jumpers with silk-
        screened settings on PCB.
       Spare enhanced low profile bracket is included to work in low 
        profile chassis.
    Includes CyberSerial Dual PCIe (with enhanced standard height bracket),
      Spare enhanced low profile bracket, "Y" split power cable, Driver CD, 
      Quick installation guide.
* Built-in 32-byte FIFO buffers dramatically increase data transmit/receive 
  speed, especially under Windows multitasking environment.
* 4-layer PCB board: separate layers for data & grounding. Greatly reduces 
  signal noise & loss. Delivers more reliable high-speed data transfers.
* Enhanced bracket design to prevent bending. Connected to PCB with 
  washered screws for a more secure connection.
* Supports PME # (Power Management Event). Allows device to request a 
  change in system power state (wake up system).
* Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR 
  (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers 
  much improved noise suppression & achieves higher levels of performance/
  reliability.
* Use SMT (Surface Mount Technology) type crystal. Offers cleaner design 
  than traditional DIP-type crystal. Provides greatly improved grounding, 
  which reduces EMI emission & improves performance/reliability.
* Onboard power connector to provide reliable power source for devices that 
  require power.
    
  -- SPECIFICATIONs ------------------------------------
INTERFACE/BUS- PCI-Express x1 slot
CHIPSET      - SIIG CyberPro + TI 
CONNECTORS   - (1) 9-pin RS232 Serial port
APPROVALS    - FCC Class B (DoC) & CE
SOFTWARE     - Includes Ulead VideoStudio Editing 7.0 SE DVD software
REQUIREMENTS - PCI Express-enabled system 
               available PCI Express slot 
               Windows 2000/XP/Server 2003 
             www.siig.com
                                                      support@siig.com