MODEL- SSR212CCNA         VENDOR- INTEL CORP.
    
FEATURES- Intel 2U Storage System 
       FXCCHASSIS Chassis and SE7520JR2ATAD2 Server Board: A complete 
        hardware solution for small to medium businesses which can be 
        coupled with a number of different industry software solutions to 
        create a SAN, NAS or DAS appliance.
       A storage building block that provides up to 6 TB of data storage in 
        a small 2U rackmount form factor.
       The Intel Storage System SSR212CC is a complete hardware solution 
        that can be coupled with one of a number of different industry 
        software solutions to create a storage area network (SAN), network 
        attached storage (NAS) or direct attached storage (DAS) appliance. 
       With the Low Voltage Intel Xeon processor, it has enough power to be 
        used as an application server for data-intensive applications like 
        e-mail and databases.
       The Intel Storage System SSR212CC addresses the growing storage 
        demand by supporting up to 6 TB of data distributed across 12 
        Serial ATA (SATA) hard drives. It features hardware support for 
        RAID levels 0, 1, 10, 5, and 50, making data more reliable and 
        faster to access.
    Includes 2U system chassis (including SATA backplane, cooling module, 
      power supply enclosure), 500 W power supply module, Intel Server 
      Board SE7520JR2, (2) Intel PRO/1000 Network connections, Intel Xeon
      processor 2.8 GHz, (2) Intel RAID Controller SRCS28X, w/Battery 
      Backup Units (BBU), (12) Intel hard disk drive carriers (for use with 
      Serial ATA drives), (12) hard disk drive labels, (12) Serial ATA hard 
      disk drive cables, Rail Kit, Serial Configuration Cable, Printed 
      Quick Start Guide, Resource CD.
* Support for up to 12 hot-swappable 1.5 or 3.0 Gbps SATA drives
   Easily add up to 6 TB of raw storage (with 500 GB HDDs) without system 
   downtime for future storage capacity needs. SATA drives currently 
   provide higher capacity at a lower cost than SCSI or Fibre Channel 
   drives.
* Intel Xeon processor
   Processing performance to meet the demanding needs of storage 
   virtualization.
* Dual 1 Gb Ethernet Network Interface Connections
   Provide fast access to iSCSI or network attached data.
* Two Intel RAID Controllers SRCS28Xs
   Hardware support for RAID 0, 1, 10, 5, 50
     
  -- SPECIFICATIONs -----------------------------------
STORAGE CAP. - Expandable to 3.0 TB - using twelve 250 GB drives 
               Expandable to 4.8 TB - using twelve 400 GB drives 
               Expandable to 6.0 TB - using twelve 500 GB drives 
DRIVE BAYS   - (12) Serial ATA (SATA) Hot Pluggable
HDD SUPPORT  - 3.5" SATA 
               NOTE: For specific drive family and capacities supported, 
                     please refer to the SSR212CC Tested Hardware and OS 
                     List (THOL).
PROCESSOR    - Low Voltage Intel Xeon processor 2.80 GHz with 800 MHz 
                 system bus and 1 MB L2 cache.
MEMORY CAP.  - Expandable to 12 GB maximum 
MEMORY TYPE  - Synchronous Dynamic Random Access Memory (SDRAM), DDR2-400, 
                 Registered, ECC.
DIMM SLOTS   - (6) 184-pin DIMM sockets 
ENCLOSURE CONTROLLER-
               On-board Vitesse VSC055 micro-controller 
TEMPERATURE SENSOR-
               Two temperature sensors are located on the backplane that 
                 allows drive cage temperature monitoring by enclosure 
                 management.
SAF-TE       - The backplane firmware complies with version 1.00 rev 
                 041497, of the SAF-TE specification.
SATA COMPLIANCE-
               SATA 1.5 Gb/s, 3.0 Gb/s 
CLIENT CONNECTIVITY-
               Client connectivity via Internet Protocol Small Computer 
                 System Interface (iSCSI) Dual Gb/s Ethernet.
INDICATORS   - LEDs for Fault, ID, Power
BACK PANEL   - Buttons and switches: Power button, reset button 
               I/O connectors      : (1) RJ-45 COM B Serial port
                                     (2) RJ-45 Ethernet ports 
               Power receptacle    : (1) IEC AC per installed power supply 
                                         module.
COOLING      - Chassis includes three dual rotors and two single rotor 
                 40mm hot-swappable redundant system fans for cooling the 
                 hard drives, baseboard and SATA Host Bus Adapter (HBA) 
                 cards.
               The power supply enclosure contains one 60 mm fan.
POWER SOURCE - 500 W continuous, 1+1 redundant power supplies 
CHASSIS      - 2U rack-mount chassis
               Rail mount, compatible with four-post rack mount only
               17.6"w x 3.41"h x 24.8"d       WT.- 42 lbs. w/o drives
      www.intel.com  
                                           requests.rma@intel.com