MODEL- E-TBT-FRL-05SC     VENDOR- TRANSITION NETWORKS
    
FEATURES- Ethernet Stand-Alone Media Converter
       10BaseT to 10BaseFL MM (SC)[2 km].
       Two 10BASE-T to 10BASE-FL Media Converters used back-to-back extend 
        the distance between two 10BASE-T devices up to 5 km using 
        multimode fiber or up to 40 km using single mode fiber without a 
        repeater.
       Connect your workgroup to a distant server or a central switch; or 
        extend distances between like and unlike devices in either full or 
        half-duplex modes. 
* Integrate mixed cabling environments using either switched or shared 
  Ethernet. 
* AutoCross
   Automatically detects and configures the twisted pair port on the 
   converter to the correct MDI or MDI-X configuration. 
* Link Pass Through
   Link Pass Through is a troubleshooting feature that allows the media 
   converter to monitor both the fiber and copper RX ports for loss of 
   signal. 
    
  -- SPECIFICATIONs ----------------------------------
CONNECTORS   - (1) 10BaseT (RJ-45) [100 m/328 ft.] 
               (1) 10BaseFL 850nm multimode (SC) [2 km/1.2 miles]
STANDARDS    - IEEE Std. 802.3 10BASE-T; 10BASE-FL 
FIBER OPTIC CONNECTOR-
               Multi mode  Min TX PWR    : -17.5 dBm
                           Max TX PWR    : -11.0 dBm
                           RX Sensitivity: -41.5 dBm
                           Max In PWR    : -11.0 dBm
                           Link Budget   :  24.0 dB 
INDICATORS   - LEDs for Power, Link, Receive
APPROVALS    - UL listed and CSA certified 
               FCC Class A, CISPR/EN55022 Class A, EN55024, EN61000, 
                 CE Mark.
POWER        - External AC/DC required: 12 VDC, 0.5 A, unregulated, 
                 standard.
DIMENSIONS   - 3.0"w x 1.0"h x 3.9"d
www.transition.com