MODEL- J/E-CF-02SC        VENDOR- TRANSITION NETWORKS
    
FEATURES- Just Convert-IT Ethernet Stand-alone Media Converter
       10BaseT to 10BaseFL MM (SC), 2km.
       The "Just Convert-IT" 10BASE-T to 10BASE-FL Media Converter is an 
        inexpensive, no frills, way to extend the distance between Ethernet 
        connections with the use of fiber optic cable; while maintaining 
        the same quality and reliability found on Transition's full-
        featured line of products.
* Connect Legacy Networking Equipment
   Connect an existing 10BASE-T segment or device, such as a printer, that 
   does not support a fiber optic connection, to an Ethernet fiber optic 
   backbone. 
* Unit and Port LEDs allow for quick status information. 
* Cost-effective way to extend distance. 
* Can be rack-mounted in the E-MCR-04. 
    
  -- SPECIFICATIONs ----------------------------------
CONNECTORS   - (1) 10BaseT (RJ-45) [100 m/328 ft.] 
               (1) 10BaseFL 850nm multimode (SC) [2 km/1.2 miles]
STANDARDS    - IEEE Std. 802.3 10BASE-T; 10BASE-FL 
FIBER OPTIC CONNECTOR-
               Multimode Min TX PWR    : -19.0 dBm
                         Max TX PWR    : -14.0 dBm
                         RX Sensitivity: -32.5 dBm
                         Max In PWR    : -14.0 dBm
                         Link Budget   : 13.50 dB 
INDICATORS   - Power: On for normal operation
               Copper: Steady = Link; Flashing = RX Data
               Fiber: Steady = Link; Flashing = RX Data 
APPROVALS    - FCC Class A, CISPR/EN55022 Class A, EN55024, CE Mark 
POWER        - External AC/DC required; 12VDC nominal, 500mA max. 
               Consumption  2.8 watts  
DIMENSIONS   - 3.0"w x 1.0"h x 3.9"d
www.transition.com