MODEL- MBD-X6DHi-G2-0     VENDOR- SUPER MICRO
    
FEATURES- X6DHi-G2 (Dual Core) E7520 Motherboard- Retail box
       Extended ATX, up to 16 GB of DDRII, 2x SATA.
       The E7520 (Lindenhurst) chipset products support 800MHz FSB Xeon 
        processors with EM64T, dual-channel DDR and DDRII memory with ECC 
        support. Moreover, the E7520 integrates PCI-X and PCI-Express 
        technology into server solutions.
    Includes Motherboard, Manual, 9-pin Serial port cable, ATX floppy 
      cable, ATA 66/100 IDE LP cable, 2-port USB cable, Driver disk, 
      motherboard I/O shield.
  
  -- SPECIFICATIONs -----------------------------------
PROCESSOR  - Dual 604-pin FC-mPGA4 Sockets 
             Supports up to two Intel 64-bit Xeon processor(s) of the same 
               type below: 
                - Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated 
                  Advanced Transfer Cache.
                - Xeon (Nocona) CPU with 1MB L2 Integrated Advanced 
                  Transfer Cache, up to 3.60 GHz.
                - Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced 
                  Transfer Cache, up to 3.80 GHz.
                - Xeon LV (Low Voltage) CPU, up to 2.8 GHz 
             800 MHz System Bus
             Supports 64-bit and 32-bit Operating Systems
BIOS       - 8Mb Flash EEPROM with Phoenix BIOS 
             Plug and Play (PnP) 
             SMBIOS 2.3 
             USB Keyboard Support 
             DMI 2.3 
             ACPI 1.0 
CHIPSET    - Intel E7520 chipset
             MCH + 6300ESB + PXH/V + 82541GI 
MEMORY     - Eight 184-pin DIMM sockets support up to 16 GB DDRII 400MHz 
               memory.
             Dual channel memory bus, Memory must be populated in pairs,
               Single-rank modules are recommended for 6+ DIMM support.
             Accepts DDRII 400MHz buffered (registered) ECC SDRAM 72-bit, 
               240-pin gold-plated DIMMs.
             Accepts 256, 512 MB, 1 GB, 2 GB; 1.8V only.
             Error Detection corrects single-bit errors, Detects double-bit 
               errors (using ECC memory), Supports Intel x4 Single Device 
               Data Correction (SDDC).
EXPANSION  - (2) PCI-Express (x8) slots
             (1) 64-bit 133MHz PCI-X (3.3v) slot
             (2) 64-bit 100MHz PCI-X (3.3v) slots
             (1) 32-bit 33MHz PCI (5v) slot
PCI IDE    - Dual EIDE channels support up to four UDMA IDE devices.
             Supports UDMA Mode 5, PIO Mode 4, and ATA/100.
SERIAL ATA - Integrated 6300ESB 2-port SATA Controller supports two SATA 
               connectors that support 2 SATA drives.
AUDIO      - None
VIDEO      - Integrated ATI Rage XL SVGA PCI video controller with 8 MB of 
               video memory.
ETHERNET   - Integrated Dual Intel 82541GI single port Gigabit Controllers.
             Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output.
RAID       - None
SCSI       - None
I/O PORTS  - (2) USB 2.0/1.1 rear ports 
             (2) USB internal headers
             (1) Floppy controller; 1.44 MB, 2.88 MB, 3-mode support 
             (2) 10BaseT/100BaseTX/1000BaseT/RJ45 ports
             (1) 15-pin VGA port
             (2) PS/2 ports (Keyboard/Mouse)
             (1) Serial port (Fast UART 16550)
             (1) Serial header
MANAGEMENT - ACPI/ACPM Power Management
             Wake-On-Ring (WOR) header
             Wake-On-LAN (WOL) header
PC HEALTH  - CPU        : Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, 
                            +/- 12V.
             FAN        : Total of four 4-pin fan headers and four 3-pin 
                            fan headers.
                          8x fans with tachometer status monitoring 
                          Low noise fan speed control 
             Temperature: Monitoring for CPU and chassis environment 
                          CPU thermal trip support 
                          Thermal Monitor 2 (TM2) support 
             Misc.      : Chassis intrusion detection
                          Chassis intrusion header
CHASSIS    - Use with SC823i-R500LP 
                      SC823i-500RC 
                      SC743i-R760 
                      SC743i-650 
                      SC742T-550 
             To ensure system stability with non-Paxville CPUs, a 420W 
               (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 
               24-pin are required].
             To ensure system stability with Paxville Dual Core CPUs, a 
               500W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) 
               and 24-pin are required].
             Chassis must have CPU mounting holes required for 800MHz FSB 
               CPUs with this serverboard. 
SOFTWARE   - Super Doctor III
             Watch Dog
             NMI
FORM FACTOR- Extended ATX 12" x 13.05" 
www.supermicro.com   
                                               support@supermicro.com