Product Description:
Features:
- It samples AD conversion with CPU putting on the USB module
inside. The sampled AD conversion data can stores in a module for
greatest 256K data. It is dependent in handling of module inside time
to sample in a feasible smallest sampling period, and the time is about
200uSec(1 channel use) - 1mSec(16 channel use)(Actual survey
value: By load states of USB, we have a case to get longer in a
period).
- Analog trigger function: The ADI16-4(USB) sampling start
and stop can be controlled by the signal change from a specified
channel. Because you can select either upward or downward slop
again set value, sampling can be performed without missing the measured
event.
- Isolated from external device: There is not external
electric effect on the host computer by way of USB ports because of the
isolation between the CPU of the module and A/D converter by
opto-coupler.
- It supports the voltage / the electric current
output: ±10V or 0 - 20mA can choose an either range of
one. In addition, it is not to be damaged to ±20V at the
maximum because an overvoltage protection circuit is had built-in on
each analog input terminal.
- The design that is convenient to incorporate it: On
the attachment which a 35mmDIN rail can install directly, It can easily
attach/detach.
- Insulated high precision analog input module for USB2.0
Bus
: USB
Function : Input
The number of input channels : Differential 4ch
Input range : ±10V
Input range : 0 -- 20mA
Resolution : 16bit
A/D conversion speed : 10µsec x ch + 20µsec
[Voltage]
A/D conversion speed : 40µsec x ch + 20µsec
[Current]
|
INTERNATIONAL GROUND SHIPPING: 