Product Description:
Specifications :
ANALOG INPUT
Isolated specification: Un-isolated
No. of channels: 16 single-ended, 8 differential
Range:
- Bipolar: ±10V, ±5V, ±2.5V
- Unipolar: 0~+10V, 0~+5V (jumper setup)
Voltage: ±15V max.
Impedance: 1MÙ min.
Resolution: 16-bit
Conversion rate: 1ìsec/channel max.
Non-linearity error: ±5LSB
Buffer memory: 256M Word FIFO or 256M Word RING
Conversion start trigger: Software, conversion data
comparison, TTL level external signal
Conversion stop trigger: Specified sampling data, input data
comparison, TTL level external signal, software
ANALOG OUTPUT
Isolated specification: Un-isolated
No. of channels: 1
Range:
- Bipolar: ±10V
- Unipolar: 0~+10V (jumper setup)
Current: ±5mA
Impedance: 1Ù max.
Resolution: 16-bit
Conversion rate: 10ìsec max.
Non-linearity error: ±3LSB
DIGITAL I/O
Type: TTL-level (positive logic)
Input:
- No. of channels: 4 (counter control input and common use are possible)
Output:
- No. of channels: 4 (counter output and selection are possible)
PROGRAMMABLE TIMER
Device: 16-bit counter three-pieces (i8254 or equivalent)
Timer: 2~7 x 10^13�sec
Clock: Inside (4MHz) or external signal (jumper setup)
INTERRUPT
Level: One of IRQ 5, 7, 9, 11, 12, 15
Causes:16 types
GENERAL
DMA:
- Transfer channel: 1 (either channel 5, 6, or 7 is chosen by software)
I/O addresses: Any 16-byte boundary
Connectors:
- CN1(AIO): 37-pin D-type female
- CN2(DIO): 16-pin header male
Power consumption: DC+5V 2000mA max.
Operating condition: 0~50°C, 20~90% RH (no condensation)
Bus specification: 32-bit, 33MHz, 5V
Dimensions: 13.4" x 4.7" (340.5.0mm x 120.0mm)
|
|