Product Description:
- Functions as an extended run UPS system,
standalone power source and automotive inverter
- Includes AC input cord and auto-transfer to
enable battery charging and automatic UPS support for blackouts &
brownouts
- 750
watts continuous output power (while inverting); provides up to twice
this rating for momentary startup of inductive loads. Provides 960
watts of power while passing through utility AC; the pass through power
the APSX750 can supply is limited by the facility/vehicle circuit board
which the APSX750 is connected to.
- Battery runtime is dependent upon the size
and number of user-supplied 12-volt batteries used
- 2 outlets; 1.8 m (6-ft.) AC power cord; DC
input terminals for 12V battery connection
- Converts 12 volt DC to 230 volt AC
- Frequency control for operating stability
- Advanced 20 amp, 3-stage battery charger and
selector switch for gel or wet cell batteries
- Resettable circuit breaker protects APS
against system overload
- Switch allows user to select between off,
auto-invert and charge-only settings
- 6 diagnostic LEDs indicate AC present, on
battery, overload, & battery voltage level (high, medium, &
low)
- Configuration
switches to allow the user to select the low voltage for the unit to
automatically transfer from AC power to battery backup
- Coated internal circuit boards offer
continuous operation in humid environments (0-95%, non-condensing)
- RJ45 port allows connection of
APS/PowerVerter Remote Switch (manuf# APSRM4)
|