MODEL- AP7941             VENDOR- AMERICAN POWER CONVERSION
    
FEATURES- Rack PDU, Switched, Zero U, 30A- Black
       APC Switched Rack PDU, Input: 200V, 208V, Input Connections: NEMA 
        L6-30P, Cord Length: 10 feet (3.05 cm), Output: 200V, 208V, Output 
        Connections: IEC 320 C13,IEC 320 C19.
       APCs Switched Rack Power Distribution Units (PDUs) are premium 
        solutions to many of the power management problems seen in todays 
        IT environments. Some of the problems are unauthorized use of power 
        outlets, locked-up equipment, in-rush current, overloaded circuits, 
        and the need of remote access to power outlets in the rack. The 
        Switched Rack PDUs address these problems through individual outlet 
        control, power on and off delays, current monitoring, alarm 
        thresholds, and network management. Individual outlet control 
        allows users to turn outlets on, turn outlets off, or recycle power 
        to equipment, which can reboot locked-up equipment and avoid 
        unauthorized use of outlets. Power delays allow users to determine 
        the order in which equipment is powered up or down. Utilizing the 
        power delay feature will avoid in-rush current, which can cause 
        overloads. Monitoring the current draw at the rack level is key to 
        avoiding downtime due to overloaded circuits. The Switched Rack 
        PDUs provide an aggregate current draw, which can be viewed 
        remotely or locally, via digital display. In addition, alarms will 
        be generated based on user-defined thresholds to alert users of 
        potential circuit overloads (NOTE: Currently available on select 
        models only. Please see feature list for availablity per SKU). 
        Users can access, configure, and control the Switched Rack PDUs 
        through Web, SNMP, or Telnet Interfaces. 
* Local Current Monitoring Display  
   The aggregate current draw per power distribution unit is displayed on 
   the unit via a digital display. The local digital display helps 
   installers avoid overloaded circuits by providing a visible warning when 
   the current draw is close to the maximum amperage draw of the strip. 
   (Available on designated SKUs only)  
* Alarm Thresholds  
   Define alarm thresholds in order to avoid overloaded circuits. Network 
   and visual alarms inform the user of possible problems. (Note: Only 
   available on units with the current monitoring capabilities. Please see 
   SKU specifications for availability)  
* Network Management  
   Full-featured network management interfaces that provide standards-based 
   management via Web, SNMP, and Telnet. Allows users to access, configure, 
   and manage units from remote locations to save valuable time. Associated 
   with this feature is the ability to quickly and easily upgrade the 
   firmware via network download to installed units for future product 
   enhancements.  
* Remote Individual Outlet Control  
   Remotely manage outlets so users can turn outlets off that are not in 
   use (prevent overloads) or recycle power to locked-up equipment 
   (minimize costly downtime and avoid travel time to equipment).  
* Power Delays  
   Allows users to configure the sequence in which power is turned on or 
   off for each outlet. This helps avoid in-rushes at start-up, which can 
   cause overloaded circuits and dropped loads. Sequencing also allows 
   users to predetermine which piece of equipment is turned on first so 
   other equipment dependant on that unit will function properly.  
* InfraStruXure Manager compatible  
   Enables centralized management via APC's InfraStruXure Manager.  
* Load Indicator LED  
   Indicates overload and warning conditions based on the user-defined 
   alarm thresholds. Alerts users of potential overloaded circuits.  
* Rack-Mountable  
   Includes horizontal, vertical, and toolless-mount varieties. Puts power 
   where it is needed most - in the racks near the equipment.  
* Single input power source  
   Supply power from one branch whip to multiple pieces of equipment, 
   conveniently powering rack-mount equipment. Saves time and money during 
   installation by using one branch whip and standard connections.  
     
  -- SPECIFICATIONs ----------------------------------
OUTPUT   - Nominal Output Voltage      : 200V, 208V
           Output Connections          : (21) IEC 320 C13
                                         ( 3) IEC 320 C19
INPUT    - Nominal Input Voltage       : 200V, 208V
           Input Frequency             : 47 ~ 63 Hz
           Input Connections           : NEMA L6-30P
           Cord Length                 : 10 feet (3.05 meters)  
           Input Current per phase     : 24A max.
           Load Capacity               : 4992 VA  
APPROVALS- cUL Listed, CE, FCC Part 15 Class A, ICES-003, UL Listed 
SIZE     - 2.19"w x 70.0"h x 1.73"d          WT.- 16.25 lbs.
   www.apcc.com