MODEL- GN-G10F64            VENDOR- CONNECTGEAR                             
                                                                            
FEATURES- Gigabit Fiber Adapter Card                                        
       From 10Mbps to 100Mbps, the Ethernet technology is getting faster and
        faster.  However, your network seemed never fast enough to support  
        some heavy users or accommodate large file transmission.  It's time 
        to upgrade your servers and workstations with ConnectGear's Gigabit 
        Ethernet adapter.                                                   
       The GN-G10F64 Gigabit Ethernet adapter is built on 64-bit/32-bit PCI 
        bus architecture and proven technology of Gigabit (1000Mbits)       
        Ethernet.  Running on fiber optics, the GN-G10F64 works 10 times    
        faster than fast Ethernet adapter.  ConnectGear's Gigabit Ethernet  
        Adapter will deliver what you need on a truly high-speed network,   
        on either copper or fiber.                                          
       The GN-G10F64 is built with SC fiber connectors that will operate at 
        full-duplex mode to provide extremely fast data throughput.   With  
        backward compatibility, both adapters would perform exactly same as 
        32-bit Gigabit adapter when plugged into a 32-bit PCI slot.         
 * Support 64/32-bit, 66/33Mhz PCI Bus Master for high performance and low  
   processor utilization.                                                   
 * Support full duplex design to double the performance to 2000Mbps.        
 * One fiber SC connector for 1000Base-FX transmission.                     
 * Auto-setup IRQ and I/O address.                                          
 * Network Drivers : Windows 98/Me/NT/2000, NetWare version 4.x & 5.x and   
   Linux.                                                                   
 * Complies with IEEE 802.3z Gigabit standard.                              
                                                                            
STANDARDs    - IEEE 802.3x                                                  
INTERFACE/BUS- PCI Rev. 2.2, 32/64 bit, 33/66MHz                            
CONNECTORs   - (1) 1000BaseFX/SC port                                       
INDICATORs   - LEDs for 100Mbps, Link/Activity                              
NOS SUPPORT  - Windows 98/Me/NT/2000, NDIS 4/5, NetWare  Ver. 4.x, 5.x,     
                Unix/Linux.                                                 
APPROVALS- FCC Class B, CE MARK, C-Tick                                     
www.connectgear.com