Product Description:
Cables to Go Description Page
| Description |
| The PCI CardBus/PCMCIA
controller makes adding CardBus or PCMCIA slot to any Desktop, Server
or computing equipment as easy as counting 1, 2, 3! Simply insert the
controller into a PCI slot and reboot the computer. There is no driver
to install, any dip switch or jumpers to set. Instantly, your computer
is equipped with two CardBus/PCMCIA slots with identical functions as
that in any Notebook computer. You can now conveniently add any CardBus
or PCMCIA adapters - wireless LAN card, modem card, USB 2.0 card, ATA
Flash card or PCMCIA hard drives, to the computer without shutting down
and restarting. |
| Features
|
- Add two CardBus/PCMCIA sockets via 1 PCI slot. Multiple
units can coexist in the same computer
- Mount inside any system, including low profile bracket to
mount in low profile PC
- Plug and play under Windows 98SE, Me, 2000 and XP
- Support Type I, II and III PC card
- Great for Wireless LAN card, modem card, USB 2.0 PC card,
Firewire PC card, SCSI PC card, LAN PC card, ATA Flash, PCMCIA hard
drive, CD-DigiAdapter, Dual 4-in-1 DigiAdapter or any CardBus adapter.
|
Includes
|
|
PCI CardBus/PCMCIA controller
|
| Specifications |
- 2 PC card slots, fully compliant with PC Card standard 7.1
- Support Type I, II and III PC cards
- Include low profile PC mounting bracket
- PCI Bus Power Management Interface Specification 1.1
compliant
- Advanced Configuration and Power Interface Specification
1.0 compliant
- PCI Local Bus Specification Revision 2.2 compliant
- PC 98/99 compliant
- Compliant with the PCI Bus Interface Specification for
PCI-to-CardBus Bridges
- Supports active Flash media and Smart Card adapters
- Programmable D3 status terminal
- Mix-and-match 5-V/3.3-V 16-bit PC Cards and 3.3-V CardBus
cards
- Supports two PC Card or CardBus slots with hot insertion
and removal
- Supports 132-MBps burst transfers to maximize data
throughput on both the PCI bus and the CardBus bus
- Interrupt modes supported: serial ISA/serial PCI, serial
ISA/parallel PCI, parallel PCI only
- Multifunction PCI device with separate configuration space
for each socket
- Five PCI memory windows and two I/O windows available to
each 16-bit PC Card socket
- Two I/O windows and two memory windows available to each
CardBus socket
- Compatible with 98SE, Me, 2000 and XP
- Dimension:
- 1 year Manufactures warranty
All specifications are subject to change without notice
|
| System Requirements |
- PC/AT or Compatible System
- One free PCI slot
- Pentium or greater
- Minimum 32 MB RAM
- 10 MB minimum free hard disk space
- One of the following operating systems: Windows 98SE, Me,
2000 or XP
*Transfer rate is at USB 1.1 speed when connect to USB 1.1 port |
|
INTERNATIONAL GROUND SHIPPING: 