Model:

3Ware Escalade 8006-2LP

Host Side Interface:

64-bit 66MHz PCI

Number of Channels:

Dual Channel

Device Supports:

2 x hard disk drives

Interface Support:

2 x SATA hard disk drives, IDE hard disk drives (ATA133/100)

RAID Levels:

0, 1, and JBOD     

Software Support:

Microsoft® Windows® 2000/XP/2003

Red Hat Linux® 8.0, 9.0

SuSE Linux 8.1, 8.2

FreeBSD 4.8

Features:

Supports up to 3TB of storage (dependent on drive capacity)

2TB single array maximum

StorSwitch point-to-point, non-blocking architecture

On-board processor provides true hardware based RAID and intelligent drive management functions

SCSI device driver model to take advantage of the benefits of SCSI using inexpensive ATA drives

Remote browser 3ware Disk Manager (3DM) utility with password security for network management of storage arrays

SMTP support for email/pager notification

Easy-to-configure arrays from BIOS; 3DM or CLI utilities

Staggered spin-up to minimize in-rush current at power up

Bootable array support for greater fault tolerance

Multiple logical volumes and RAID levels can exist on one card for maximum configuration flexibility

Multiple card support (up to 4) within a system for large storage requirements

Hot-swap and hot-spare support for data availability

Dynamic sector repair for robust data protection

S.M.A.R.T. disk drive monitoring for reliability

2 levels of administrator access to 3DM for added security

Half-length PCI Universal short form factor

PCI 2.2 compliant 64-bit/66MHz bus master

Auto-sensing Serial ATA,ATA 133/100 disk drive interface1, 2

BIOS PnP (plug and play) and BBS (BIOS boot specification) support