MODEL- P4SCT              VENDOR- SUPERMICRO
  
FEATURES- ATX Intel 875P Motherboard
       With an 800 MHz front side bus and dual channel DDR400 memory, the 
        Intel 875 chipset unlocks new levels of system performance for the 
        most demanding applications.
       Intel Pentium 4 Support up to 3.4 GHz, Celeron up to 2.8 GHz.
       Intel 875P Chipset 
       Up to 4GB DDR 400/333/266 SDRAM 
       1 x Intel 82547GI CSA Gigabit Ethernet Controller 
       Intel 6300ESB Serial ATA Controller 
       3 x 64-bit 66MHz PCI-X (3.3V), 2 x 32-bit 33MHz PCI (5V) slots 
       ATI RageXL 8MB PCI Graphic Controller 
       1 x AGP Pro 8x 1.5V Slot
    Includes mainboard, CPU retention kit, 9-pin Serial port cable, ATX
      Floppy cable, ATA 66/100 IDE LP cable, 2 ft. Amphenol Serial ATA
      cable, Driver Disk, I/O Shield, and manual.
 
  -- SPECIFICATIONs --------------------------------------
PROCESSOR - Single mPGA478 ZIF Sockets
            Supports an Intel Pentium 4 processor with 2MB of integrated 
             Advanced Transfer Cache up to 3.4GHz (Extreme Edition).
            Supports an Intel Celeron processor with 128KB of integrated 
             Advanced Transfer Cache up to 2.8GHz.
            Hyper-threading enabled
            800/533/400 MHz System Bus
BIOS      - 8Mb Flash EEPROM with AwardBIOS  
                - Plug and Play (PnP)
                - APM 1.2
                - DMI 2.3 support
                - PCI 2.3 
                - ACPI 1.0
                - BIOS rescue hot keys
                - Hardware BIOS virus protection
                - USB Keyboard support 
CHIPSET   - Intel 875P chipset
            MCH + 6300ESB + FWH
MEMORY    - Four 184-pin DIMM sockets support up to 4 GB of DDR400/333/266 
             memory.
            Dual channel memory bus supported.
            Memory must be populated in pairs for dual channel interface.
            Accepts DDR400/333/266 (ECC or non-ECC) unbuffered SDRAM, 
             184-pin gold-plated DIMMs in 128MB/256MB/512MB/1GB sizes, 
             2.5 volt only.
SLOTS     - (2) 32-bit 33MHz PCI (5v) slots
            (3) 64-bit 66MHz PCI-X (3.3v) slots
            (1) 32-bit 8x AGP Pro slot, 1.5v
AUDIO     - None
VIDEO     - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
ETHERNET  - Intel 82547GI CSA Gigabit Ethernet Controller supports 10BaseT, 
             100BaseTX, and 1000BaseT, RJ45 output.
PCI IDE   - Dual EIDE channels support up to four UDMA IDE devices
            Supports UDMA Mode 5, PIO Mode 4, and ATA/100
SERIAL ATA- SATA Controller on-chip (Intel 6300ESB)
            Dual Serial ATA ports
            RAID 0, 1 Supported
I/O PORTS - (1) Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
            (2) USB 2.0/1.1 ports; One USB header supports additional two
                USB ports.
            (2) Serial ports, Fast UART 16550
            (1) 15-pin VGA port
            (1) Parallel port, ECP/EEP
            (1) Gigabit/RJ45 LAN port
            (2) PS/2 ports for Keyboard & Mouse            
PC HEALTH MONITORING-
            CPU        : Monitors for CPU Cores, +3.3V, +5, +/-12V, +3.3V/
                          +5V Standby, VBAT.
                         CPU Core 3-Phase-switching voltage regulator with 
                          auto-sense from 0.85V~1.65V.
                         Adjustable CPU clock frequency ratio settings (via 
                          BIOS).
            FAN        : Total of five 3-pin fan headers
                         3x fans with tachometer monitoring
                         Status monitor with firmware/software on/off 
                          control.
            Indicators : CPU Overheat LED
                         System Overheat LED
                         +5V standby alert LED
                         Suspend-state indicator LED 
            Temperature: Monitoring for CPU, chassis, environment
                         CPU thermal trip support
            Other      : Chassis intrusion detection
                         Chassis intrusion header
MANAGEMENT - Software  : Super Doctor III
                         Watch Dog
             Power Configuration:
                         ACPI/APM Power Management
                         Main Switch Override Mechanism
                         Wake-On-Ring (WOR) header
                         Wake-On-LAN (WOL) header
                         Suspend to RAM (STR)
                         Power-on mode control for AC power loss recovery
                         Internal/External modem remote ring-on
COMPATIBLE - Works with SC742I450 (Rackmount Chassis)
               "     "  SC742I300 (Tower/4U Chassis)
               "     "  SC733I300 (Mid-Tower Chassis)
               "     "  SC762420  (Tower Chassis)
POWER      - To ensure system stability, a 300W (minimum) ATX power supply 
              [4-pin +12V AND (20 or 24-pin)] is required.
FORM FACTOR- ATX, 12" x 9.5" (30.5 x 24.1 cm)
www.supermicro.com   
                                               support@supermicro.com