Product Description:
The IC-485S is a hardware solution to the problem of converting signals
between two standards. Data transfer can take place at up to 1200m
(4000'), over four- or two-wire cable for full or half duplex,
respectively. The converters can handle any RS-485/RS-422 device
allowing it to function as a short haul modem or interface converter.
Request to send (RTS) selection allows up to 32 receivers to be set up
in a multidrop installation, making for a cost effective network
configuration. The IC-485S is a bi-directional interface converter for
RS-232 and RS-485. With the IC-485 series, it provides Point-to-Point,
Multidrop and Simplex operations. The IC-485S also provides an extra
Monitoring function. Two slide switches are used to configure its
operation mode, contention control, and assignment of the RS-232.
| Device Type |
Media converter |
| Enclosure Type |
External |
| Connectivity
Technology |
Wired |
| Cabling Type |
Serial RS-232, serial RS-422, serial
RS-485 |
| Max Transfer
Distance |
0.7 miles |
| Features |
Full duplex capability |
| Interfaces |
1 x serial - RS-232 - 1 Ý 1 x
serial - RS-422/485 - 1 |
| Service &
Support Details |
Limited warranty - 3 years |
|
INTERNATIONAL GROUND SHIPPING: 