Product Description:
Main Specifications
| Product Description |
Media converter |
| Device Type |
Media converter |
| Enclosure Type |
External |
| Cabling Type |
Serial RS-232, serial RS-422, serial RS-485 |
| Max Transfer Distance |
1 miles |
| Features |
Full duplex capability |
Marketing Information
|
The IC-485S is a hardware solution
to the problem of converting signals between two standards. Data
transfer can take place at up to 1200m (4000'), over four- or two-wire
cable for full or half duplex, respectively. The converters can handle
any RS-485/RS-422 device allowing it to function as a short haul modem
or interface converter. Request to send (RTS) selection allows up to 32
receivers to be set up in a multidrop installation, making for a cost
effective network configuration. The IC-485S is a bi-directional
interface converter for RS-232 and RS-485. With the IC-485 series, it
provides Point-to-Point, Multidrop and Simplex operations. The IC-485S
also provides an extra Monitoring function. Two slide switches are used
to configure its operation mode, contention control, and assignment of
the RS-232. |
| General |
| Device Type |
Media converter |
| Enclosure Type |
External |
| Networking |
| Connectivity Technology |
Wired |
| Cabling Type |
Serial RS-232, serial RS-422, serial
RS-485 |
| Max Transfer Distance |
1 miles |
| Features |
Full duplex capability |
| Expansion /
Connectivity |
| Interfaces |
1 x serial - RS-232 - 1
1 x serial - RS-422/485 - 1 |
|
INTERNATIONAL GROUND SHIPPING: 