Product Description:
EKI-1524 feature two
independent Ethernet ports and MAC addresses to provide a redundant
networking mechanism to guarantee Ethernet networking reliability. The
EKI-1524 is a network-based, serial device server for connecting four
RS-232/422/485 devices, such as CNCs, PLCs, scales, and
scanners,directly to a TCP/IP network. Once connected through EKI-1524
device server, your serial device will be able to send and receive data
on a network like any other network device. EKI-1524 provide a simple
and cost-effective way to bring the advantages of remote management and
data accessibility to thousand of devices that can not connect to a
network.
EKI-series device server provide various operations: COM
port redirection (Virtual COM port), TCP server Client and UDP mode.
After Advantech redirection software installation, standard serial
operating calls are transparently redirected to the EKI- series device
server, guaranteeing compatibility with legacy serial devices and
enabling backward compatibility with existing software. EKI-1524 also
support serial tunneling, allowing two native serial devices to
communicate over a network.
- Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
- Provides COM port redirection (Virtual COM), TCP and UDP
operation modes
- Supports baud rate up to 921.6 kbps
- Allows a max. of 5 hosts to access one serial port
- Allows a max. of 16 hosts to be accessed as TCP client mode
- Built-in 15 KV ESD protection for all serial signals
- Provides rich configuration methods including Windows utility,
Telnet console, and Web Browser
- Supports Windows 2000/XP/Vista drivers
- Automatic RS-485 data flow control
- SNMP MIB-II for network management
| Connector |
Ethernet |
RJ45 |
| Serial |
DB9 |
| Ethernet |
Interface |
10/100 Mbps |
| Ports |
2 |
| Serial |
Ports |
4 |
| Type |
RS-232/422/485 |
| Software |
Baud Rate |
50 ~ 921.6 Kbps |
| Driver |
Windows 2000/XP/Vista |
| Operating Mode |
Virtual COM, Data Mode, Control Mode |
|
INTERNATIONAL GROUND SHIPPING: 
