Product Description:
The IDE Solid State Disk has a distinct advantage over standard 2.5"
HDDs in that it is a solid-state memory with no moving parts, and
therefore not susceptible to mechanical failure as a result of
vibrations. Its thickness is only 7.4mm, which makes it very easy to
install in PCs and notebooks. The 2.5-inch IDE interface SSD has a
tough outer metal case, enormous capacities, high reliability, low
power consumption and anti-shock features that make it ideal to replace
Hard Disk Drives.
| Device Type |
Solid state drive - internal |
| Width |
2.8 in |
| Depth |
3.9 in |
| Height |
0.3 in |
| Hard Drive |
| Form Factor |
2.5" |
| Capacity |
128 GB |
| Interface Type |
IDE/ATA |
| Features |
Shock resistant, multi-level cell (MLC)
flash |
| Performance |
| Internal Data Rate |
68 MBps (read) / 46 MBps (write) |
| Reliability |
| MTBF |
1,000,000 hour(s) |
| Expansion /
Connectivity |
| Interfaces |
1 x IDE/ATAPI - 44 pin IDC |
| Compatible Bays |
1 x internal - 2.5" |
| Miscellaneous |
| Included Accessories |
Screw package |
| Compliant Standards |
CE, BSMI, FCC, RoHS |
| Manufacturer
Warranty |
| Service & Support |
2 years warranty |
| Service & Support Details |
Limited warranty - 2 years |
| Environmental
Parameters |
| Min Operating Temperature |
32 °F |
| Max Operating Temperature |
158 °F |
| Shock Tolerance |
1500 g @ 0.5ms (operating) / 1500 g @
0.5ms (non-operating) |
| Vibration Tolerance |
3 g @ 5-800 Hz (operating) / 3 g @
5-800 Hz (non-operating) |
|
INTERNATIONAL GROUND SHIPPING: 