Product Description:
The N-TRON® 9000 Series Gigabit Ethernet Capable Industrial
Ethernet Switch offers outstanding performance and ease of use. It is
ideally suited for connecting Ethernet enabled industrial and/or
security equipment and is a fully managed switch.
9002FX Module
Features:
- Slide In Module for 9000 Series Chassis
(Multimode or Singlemode Available)
- Two 100BaseFX Fiber Ports (ST or SC
Available)
- Full IEEE 802.3 Compliance
- Extended Environmental Specifications
- -20ºC to 70ºC Operating
Temperature
- -40ºC to 85ºC Storage Temperature
Specifications:
Switch Properties
- Number of MAC Addresses: 4,096
- Aging Time: Programmable
- Latency Typical: 2.9 μs
- Backplane Speed : 6.6 Gb/s
- Switching Method: Store-and-Forward
Physical
- Height: 5.10" (12.95cm)
- Width: 8.98" (22.81cm)
- Depth: 5.5" (13.21cm)
- DIN-Rail Mount: 35mm
Electrical
- Redundant Input Voltage: 10-30 VDC
- Input Current (max): 2.5A@24V (fully populated)
- Inrush @ 24V: 16.0 Amp for 7.5ms
- N-TRON Power Supply: NTPS-24-5 (5 Amp@24V)
Environmental
- Operating Temperature: -20oC to 70oC
- Storage Temperature: -40oC to 85oC
- Operating Humidity: 10% to 95% (Non Condensing)
- Operating Altitude: 0 to 10,000 ft.
Shock and Vibration (bulkhead mounted)
- Shock: 200g @ 10ms
- Vibration/Seismic: 50g, 5-200Hz, Triaxial
Reliability
Network Media
- 10BaseT: >Cat3 Cable
- 100BaseTX: >Cat5 Cable
- 100BaseFX, 1000BaseSX Multimode: 50-62.5/125μm
- 100BaseFXE, 1000BaseLX Singlemode: 7-10/125μm
100 Mb Fiber Transceiver
Characteristics
Fiber Length
|
2km*
|
15km** |
40km** |
80km** |
TX Power Min
|
-19dBm |
-15dBm |
-5dBm |
-5dBm |
RX Sensitivity Max
|
-32dBm |
-29dBm |
-34dBm |
-34dBm |
Wavelength
|
1310nm |
1310nm |
1310nm |
1550nm |
* Multimode Fiber Optic Cable ** Singlemode Fiber Optic
Cable
Gigabit Fiber Transceiver Characteristics
Fiber Length |
550m for 50/125μm*
300m for 62.5/125μm*
|
10km** |
40km** |
70km** |
TX Power Min |
-9.5dBm |
-5dBm |
-4dBm |
-3dBm |
RX Sensitivity Max |
-17dBm |
-20dBm |
-21dBm |
-23dBm |
Wavelength |
850nm |
1310nm |
1550nm |
1550nm |
Assumed Fiber Loss
|
- 3.5 to -3.75dB/km |
-0.5dB/km |
-0.25dB/km |
-0.20dB/km |
Laser Type
|
VCSEL |
FP |
DFB |
DFB |
* SX Fiber Optic Cable ** LX Fiber Optic Cable
Connectors
- 10/100BaseTX: Up to Twenty-four RJ-45 Copper Ports
- 100BaseFX: Up to Sixteen SC or ST Fiber Ports
- 1000BaseSX/LXE: Up to Two LC Duplex Ports
Recommended Wiring Clearance
- Front: 4" (10.16cm)
- Side: 1" (2.54cm)
Ordering Information
- 9000BP 5 Slot Backplane
- 9000CPU CPU Module
- 9002CPU-SX CPU Module with Two Multimode GB Fiber Optic Ports
- 9002CPU-LX-ZZ CPU Module with Two Singlemode GB Fiber Optic Ports
- 9006TX Six Port 10/100BaseTX Copper Module
- 9002FXE-XX-YY Two Port 100BaseFX Fiber Ports
- 9004FXE-XX-YY Four Port 100BaseFX Fiber Ports
Where:
- ZZ = 10, 40, 70 for GB Singlemode
- E = Singlemode, and Blank Otherwise
- XX = ST or SC, YY = 15, 40, or 80 for Singlemode, Blank for
Multimode
|