Product Description:
MODEL- PDUMH15AT VENDOR- TRIPPLITE
FEATURES- Metered PDU with ATS
Power Distribution Unit with dual-input Auto Transfer Switching!
1U rackmount PDU with digital current monitoring display; 15A 120V
capacity with 8 NEMA 5-15R outlets; Connects to NEMA 5-15R
receptacles; Integrated Automatic Transfer Switch (ATS) allows PDU
to operate from secondary input source when primary input fails;
Sequential outlet power-on prevents inrush-related equipment
interaction on startup.
Tripp Lite's 120V 15A metered PDU system with Automatic Transfer
Switching (ATS) is an 8 outlet PDU with a digital display to
indicate total PDU power consumption in amps. Outlets are
sequentially turned on at 250 milliscond intervals when the PDU is
first energized from an unpowered state to prevent inrush-related
equipment interaction on startup. Supports 1U rackmount
installation in a 2 or 4 post rack. Included are 8 NEMA 5-15R
outlets, and two 12 ft. 5-15P input power cord.
Optional integrated ATS is available for use when two separately
derived input power sources are available. The attached power cord
serves as the primary AC input cable, while the included detachable
power cord serves as the optional-use secondary AC input
connection. The PDU system passes the primary input power through
to connected equipment whenever line voltage and frequency levels
are normal. If the primary input source goes outside of these
tolerances or fails altogether, the ATS will automatically switch
all PDU output to the secondary line sourced input power (when
available) to maintain continuous operation of connected loads
without reboots or service interruptions. Once the primary power
source is restored, the PDU will automatically switch back to
primary sourced input power. The dual input cabling can be
configured for UPS maintenance bypass of standard UPS systems or to
create a redundant dual-UPS power source for a critical, single-
corded network device.
Includes PDU with attached 5-15P input power cord, Detachable C13 to
NEMA 5-15P 12 ft / 3.6m power cord for optional secondary input,
User manual with warranty information.
* 120V 15A metered PDU system with Automatic Transfer Switch (ATS).
* Dual input cords, one attached (primary) and one optional-use detachable
cord (secondary).
* Included cordsets support 5-15P plug-in connection
* Front panel digital ammeter displays power consumption in amps
* Eight built-in NEMA 5-15R output receptacles
* Optional ATS function enables setup for hot-swappable UPS maintenance
bypass, dual UPS protection or dual AC input redundancy for critical
single-corded network hardware.
* Small 1U rackmount format installs in only one rack space with a maximum
installed depth of 14.5 inches.
-- SPECIFICATIONs -----------------------------------
OUTPUT - Volt Amp Capacity : 15A/1800VA
Nominal voltage : 120V
Outlets : (8) NEMA 5-15R
INPUT - Input amps : 15A
Connection type : (2) NEMA 5-15P
Cord length : 12 ft. (each)
Recommended
electrical service: 120V 15A, dedicated line recommended
LEDs, ALARMS & SWITCHES-
Front panel LEDs : 10 front panel LEDs display power on -
off status for each outlet, plus
3 LEDs for power status on each input
line cord. Digital Current Meter
displays output power consumption in
amps.
MATERIAL - Steel
FORM FACTOR - 1U rackmount
COMMUNICATION- SNMP compatibility: Includes slot for optional SNMPWEBCARD
accessory to enable remote individual outlet control over
IP.
APPROVALS - Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03
(Canada), RoHS Compliant.
DIMENSIONS - 17.5"w x 1.75"h x 14.5"d WT.- 11 lbs.
www.tripplite.com
|