Product Description:
DIO-16/16(USB) is
compact isolated digital I/O modules which are applied to USB and can
be used easily. This USB module performs digital signal input
from and
output to external devices. External electricity does not have
direct
effect on the host computer because of the isolation between external
signal and the CPU controlling the module by opto-coupler. The
DIO-16/16(USB) can perform a maximum of 16 points of input and 16
points of output per module.
Features
- "Installed Trigger
Monitor Function (Digital Input): Trigger monitor function notifies the
computer if the status has changed.(rise or fall) Because the
monitor
function was installed in the USB module, it will not be affected by
the other programs, and it will not increase the load of the
computer.
It can monitor the signal changes at intervals of milliseconds. "
- Digital
Output: Transistor output enabling current drive of a maximum of 150 mA
at 24 VDC or 50 mA at 48 VDC per channel. Directly drive LED
display.
- Easy
to wire: The system incorporates a screwless connector plug that allows
you to easily attach and detach wires without using any special
tools.
Press this section to insert the wire material.
- "Easy-to-install
Design: The system, in the module itself, incorporates a 35mm DIN rail
mounting mechanism as a standard item, so it can be attached and
detached easily. "
- "Easy
to extend input/output point: By adding expansion modules sold
separately, the number of input/output points can be increased.
It
adopts the unique configuration of stack connecting which permits a
simple, smart system configuration. - DIO-16/16(USB) +
DIO-16/16(FIT)GY x 3 (up to 64 points input and 64 points output)"
- "Easy-to-develop-application
Sample Program: Visual Basic, Visual C++, Delphi and C++ Builder sample
programs have been prepared. "
Digital I/O
- Bus :
USB
- Function
: I/O
- Input point
: 16
- Output point
: 16
- Bidirectional
point : -
- Response
speed : 1msec(min.)
- Voltage of
Operation (operation circuit voltage) : Input�F12 -- 24VDC
- Voltage of
Operation (operation circuit voltage) : Output�F12 -- 48VDC
- Built-in power
supply : -
- Input
circuit : Opto-isolated input (Both sink/Sauce output)
- Output
circuit : Opto-isolated open collector output (Sink type)
|