Product Description:
For demanding factory applications, Lantronix introduces the
XPress-DR+ industrial device server. The XPress-DR+ enables users to
remotely configure, monitor and control PLCs, drives, motion
controllers, power equipment, barcode scanners and other serial devices
from anywhere over the Net.
A versatile, powerful tool for
remote management of automation and assembly/packaging equipment at
manufacturing sites, automated distribution centers, refinery
plants -
or any industrial setting - it provides complete access and
control of
virtually any type of equipment with a serial port!
- Cascade multiple devices from a single network connection
- Connects enterprise systems to non-networked factory floor devices
- Enables remote firmware upgrades, saving time and money
- Supports industrial protocols
- Maximizes flexibility with an internal 2-Port 10Base-T/100Base-TX
Ethernet switch
- 15kV serial ESD protection and 2.5kV Ethernet isolation
- Wide -40° - 70°C operational temperature range
- RoHS compliant
Serial Interface |
- 2 RJ45 RS-232 Serial Ports
- Baud rate selectable from 300 to 230 Kbps
- 1 screw terminal RS-422/485 interface on Serial Port 2 (2
and 4-wire support)
- LED indicators for TXD and RXD activities
|
Serial Line Formats |
Characters |
7 or 8 data bits |
Stop Bits |
1 or 2 |
Parity |
odd, even, none |
Flow Control |
Hardware |
RTS/CTS |
Software |
XON/XOFF |
Modem Control |
|
Network Interface |
- 2 RJ45 10Base-T/100Base-TX Ethernet ports
- Embedded, unmanaged, fully compliant 802.3u non-blocking
Ethernet switch
- Store and forward architecture with 1K MAC address lookup
table
- Automatic MDI/MDI-X crossover
- Full duplex IEEE 802.3x flow control
- Half duplex back pressure flow control
- IEEE 802.1d spanning tree
|
LED Indicators |
- TX/RX activity per serial
- Link/Activity per Ethernet port
- Power/System OK
|
Management |
- Internal web server (standard tunneling firmware only)
- SNMP (read only)
- Serial login
- Telnet login
- DeviceInstaller software
|
Isolation |
- 8 kV direct contact, 15kV air discharge, ESD protection on
all Serial ports (IEC 1000-4-2, IEC 61000-4-2)
- 2 K VAC / 2.8K VDC galvanic isolation between Power Input
port to Ethernet ports (except Chassis ground)
- 2 K VAC / 2.8K VDC galvanic isolation between Power Input
port to Serial ports
- Transient Voltage protection and ESD with max
non-repetitive surge current 800 Amp (8/20 ?s) (IEC 61000-4-2)
- 2 K VA / 2.8K VDC galvanic isolation between Ethernet ports
(except chassis ground)
- 2 K VA / 2.8K VDC galvanic isolation between Ethernet ports
to Serial ports
- 40 A (5/50 ns) EFT protection (IEC 61000-4-4), 12 A (8/20
?s) lightning protection (IEC 61000-4-5) on all Ethernet ports
|
Power Input |
- Removable screw terminal block connector
- 9-30 VDC or 9-24 VAC with chassis ground
- 2.3 Watts maximum
|
Environmental (Operating) |
Temperature |
-40°C to +70°C (-40 to 158°F) |
Humidity |
20% to 90% relative humidity, noncondensing |
Agency Approvals |
- UL, CSA, FCC, CE, TUV, CTick, VCCI, FM Class 1, Div. 2
|
Protocols Supported |
- ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP,
and HTTP
|
Installable Industrial
Application Protocols |
- ModBus TCP, ModBus ASCII/RTU, DF1 Multi-Master
|
CPU |
- Lantronix DSTNI-EX 48 MHz clock, 256 KB SRAM Internal CPU
Memory
|
Flash Memory |
|
EEPROM |
|
Reset |
- Front panel recessed push button
|
Packaging |
Case |
High-impact plastic case with integrated
DIN Rail (35 mm) mount
- IP30 enclosure rating |
Dimensions (L x W x H) |
8.76 x 5.7 x 12.3 cm (3.45 x 2.25 x 4.85
in),
terminal blocks included |
|