Product Description:
template product descrip
This product is a
USB
2.0 micro converter for performing RS-232C serial communications with
external devices. Each converter has one channel RS-232C serial port.
You can use the standard COM driver software (COM Setup Disk) supplied
with the converter to access the serial ports as standard Windows COM
ports. To use this micro converter, you must install the appropriate
CONTEC driver software.
Features:
- Conforming to the
USB 2.0 and USB 1.1 standards
- "Uses
the same easy-to-use D-SUB 9 pin connectors as a PC. The converter has
a D-SUB 9 pin connector (female), allowing you to directly connect it
to a device such as a modem. You can also connect it to a cable having
a D-SUB 9 pin connector (female) through the bundled gender changer. (*
The gender changer is attached before shipment.)"
- "Maximum
communication speed = 921,600bps. This converter is equipped with
separate 128-byte and 384-byte buffers for transmit and receive. "
- Driver
software is supplied to allow the serial ports to be used as standard
Windows COM ports.(They can be set to arbitrary COM port numbers.) A
maximum of 127 terminals can be installed as configured in the range
COM1 to COM256.
- The
communication lines for each channel are electrically isolated from
each other and from the PC. Surge protection is provided for each
RS-232C signal line.
Communication:
- Bus :
USB
- Function
: RS-232C
- The number of
channels : 1ch
- Insulation
: Isolation and serge-proof
- Transmission
system : RS-232C (Async.)
- Access speed
: 300 -- 921.6kbps
|