Product Description:
Features :
Bus master function and combined data I/O function
Buffer memory available for background processing independent
of software
Software-based calibration
Synchronization control connector provided for synchronizing
operation of multiple boards
Filter function for easy connection of external signals
|
Specifications :
ANALOG INPUT
No. of channels: 32 single-ended, 16
differential
Range:
- Bipolar: ±10V, ±5V, ±2.5V
- Unipolar: 0~10V, 0~5V, 0~2.5V
Voltage: ±15V
Impedance: 1M ohms min.
Resolution: 16-bit
Conversion rate: 2µsec/channel max.
Non-linearity error: ±5LSB
Buffer memory: 64K Word FIFO or 64K Word RING
Conversion start trigger: Software, conversion data compare,
external trigger, event
controller output
Conversion
stop trigger: Settings include data save complete, conversion data
compare, external trigger, event controller output, and software
External start signal: TTL level (rising or falling edge can
be selected by software)
External stop signal: TTL level (rising or falling edge can
be selected by software)
External clock signal: TTL level (rising or falling edge can
be selected by software)
External status output signal: 2 TTL levels, Sampling clock
output
ANALOG OUTPUT
No. of channels: 2
Range:
- Bipolar: ±10V, ±5V, ±2.5V, ±1.25V
- Unipolar: 0~10V, 0~5V, 0~2.5V
Current: ±5mA
Impedance: 1ohms max.
Resolution: 16-bit
Conversion speed: 10µsec max.
Non-linearity error: ±3LSB
Buffer memory: 64K Word FIFO or 64K Word RING
Conversion start trigger: software, external trigger, event
controller output
Conversion stop trigger: Settings include data save complete,
external trigger, event controller output, software
External start signal: TTL level (rising or falling edge can
be selected by software)
External stop signal: TTL level (rising or falling edge can
be selected by software)
External clock signal: TTL level (rising or falling edge can
be selected by software)
External status output signal: 2 TTL levels, Sampling clock
output
DIGITAL I/O
Input:
- No. of channels: 8 TTL level (positive logic)
Output:
- No. of channels: 8TTL level (positive logic)
COUNTER
No. of channels: 2
Counting system: 32-bit Up count
Maximum count: FFFFFFFFh (binary data, 32 bit)
Number of external inputs: 2 TTL levels (Gate/Up) / channel
- Gate (High level), Up (Rising edge)
Number of external outputs: TTL Level 1 output / channel
- Count match output (positive logic, pulse output)
BUS MASTER
DMA channels: 2 (one each for input and output)
Transfer bus width: 32bit
Transfer data length: 8 PCI words length (max)
FIFO: 1K-word / channel
Scatter/Gather function: 64MB / channel
SYNCHRONIZATION
Control output signal: Output signal selection via software
for specifying sync master board
Control input signal: Sync factor selection via software for
specifying sync slave boards
Boards for synchronization: 16 (max ¡X including master)
Connector: x2 equivalent to PS-10PE-D4L1-B1 (JAE)
GENERAL
I/O address: 64 ports x 1,256 ports x 1 occupation
Interrupt level: Errors and various factors, 1x request line
as INTA
Connector: PCR-E96LMD or equivalent
Power consumption: +5VDC 1100mA (max)
Operating temperature: 0 to 50°C
Operating humidity: 10 to 90% (no condensation)
PCI bus specifications: 32-bit, 38MHz, 5V/3.3V
Dimensions: 6.9" x 4.2" (176.4mm x 105.7mm)
|
|
INTERNATIONAL GROUND SHIPPING: 
