|
| Manufacturer |
Tripp Lite |
| Manufacturer Part Number |
SMART2200VS |
| Manufacturer Website Address |
www.tripplite.com |
| Product Line |
SmartPro |
| Product Name |
SmartPro SMART2200VS UPS |
| Marketing Information |
Tripp
Lite's SMART2200VS intelligent, line interactive UPS protects server,
networking and telecommunications equipment from blackouts, voltage
fluctuations and transient surges. Small footprint, tower UPS system
occupies only 106 square inches of floorspace with a height of only
14.25 inches. Large capacity 2200 VA / 1600 watt rated UPS system
offers 7 minutes runtime at full load and 19 minutes at half load
during power failures. Line interactive voltage regulation corrects
brownouts as low as 79V and overvoltages as high as 147V to fully
regulated 120V nominal output for smooth continuous operation of
connected equipment. Includes a total of 9 outlets, 3 pairs of which
can be individually powered off and back on via software interface to
selectively reboot remote equipment or shed less critical loads to
extend battery runtime for more critical loads. Includes slot for
internal SNMPWEBCARD, plus 2 DB9 and 2 USB enhanced monitoring ports
for unattended shutdown, remote control and monitoring of UPS system
and power data. Ships in attractive gray color scheme. Compatible with
Tripp Lite's PowerAlert and Watchdog service software. 2 year warranty.
$250,000 connected equipment insurance. |
| Product Type |
Line-interactive UPS |
|
| Plug/Connector Type |
NEMA 5-20P |
| Receptacles |
7 x NEMA 5-15R
2 x NEMA 5-20R
|
| Switching Time |
4 ms |
|
| Load Capacity |
2200VA / 1600W |
| Input Voltage |
110V AC |
| Input Voltage Range |
120V AC Single-phase |
| Output Voltage |
120V AC Single-phase |
| Frequency |
60Hz |
| Filtering |
EMI / RFI |
|
| Network Manageability |
SNMP Manageable Optional |
| Overload Protection |
20A input breaker |
| Audible Alarms |
On Battery
Overload
Low Battery
|
| Emergency Power OFF |
Yes |
|
| Status Indicators |
Includes
5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER
STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and BATTERY LOW /
REPLACE information |
|
| Interfaces/Ports |
2USB
2DB-9
|
| Modular Slots |
1 x Communications Slot |
|
| Batteries |
Sealed Lead-acid User-replaceable Hot-swappable |
| Battery Life |
3 Year(s) to 6Year(s) |
| Backup/Run Time |
7 Minute(s) 2200VA Full-load
19 Minute(s) 1100VA Half-load
|
| Battery Recharge Time |
4 Hour(s) |
|
| Temperature |
32 °F (0 °C) to 104 °F (40 °C)
Operating |
| Humidity |
0 to 95% Non-condensing Relative Humidity |
|
| Form Factor |
Tower |
| Power Cord/Cable |
8 ft |
| Dimensions |
14.25" Height x 9.25" Width x 12" Depth |
| Shipping Dimensions |
16" Height x 14.75" Width x 19.75" Depth |
| Weight |
52.4 lb |
| Shipping Weight |
58.8 lb |
|
| Package Contents |
SMART2200VS UPS System
PowerAlert Software and cabling
Warranty information
Instruction manual
|
| Additional Information |
2200VA / 1600 watt output capacity
accommodates a variety of server, networking and telecom devices
High power density 2.2kVA UPS system occupies only 106 square
inches of floorspace with a height of only 14.25 inches
Compatible with North American 120V / 60 Hz power as found in
the USA, Canada and Mexico
Offers 7 minutes runtime with a full load of 2200VA and 19
minutes with a half load of 1100VA
Line
interactive voltage regulation corrects severe brownouts and
overvoltages from 79 to 147v back to normal 120v levels without using
battery power
9 total outlets (7 NEMA5-15R; 2 NEMA5-15/20R)
Includes
NEMA 5-20 straight blade 20 amp input plug connection; package includes
optional user installable NEMA 5-15 input plug connection
Notification of system status via 5 LEDs and multi-function
audible alarms
Included
PowerAlert Software provides e-mail or pager notification of power
problems and the simultaneous automatic unattended shutdown of multiple
servers
4 built-in communications ports (2-DB9, 2-USB) for remote
monitoring and unattended shutdown
Slot
for SNMP/web card (part#: SNMPWEBCARD) and environmental sensor (part#:
ENVIROSENSE) for remote communications in large IP environments
Supports
Tripp Lite's WatchDog software application to restore unresponsive
programs by automatically restarting them and rebooting completely
locked computers by automatically switching UPS power off and back on
again
Communication ports support on battery, low battery,
power restored, AC line voltage, DC battery voltage, load percentage,
battery charge current, battery capacity, internal UPS temperature and
line frequency status messaging. Interface supports timed inverter
shutoff after unattended shutdown, activate self-test and 10 second
reboot of connected equipment
3 pairs of customized load
management receptacles can be individually powered off and back on
again via software interface to reboot remote equipment or automatic
"load shedding" of less critical loads to extend battery runtime for
the most critical equipment
Built-in Emergency Power Off (EPO) interface supports
emergency shutoff in large facilities
Hot-swappable
/ user replaceable batteries allow on-site battery replacement through
the front panel without powering off connected equipment or removing
the UPS from the rack
UPS battery set ships fully assembled
and ready for use, no time consuming, connection of individual internal
batteries by user is necessary
UL (USA), cUL (Canada), NOM (Mexico), FCC Class A
$250,000 Ultimate Lifetime Insurance. No warranty cards
required for coverage!
2 year manufacturers product warranty
|
| System Requirement |
TYPICAL
APPLICATIONS: Ideal for protection of sensitive electronics in any
application calling for upright tower UPS protection. Common
applications include any mix of servers, workstations, hubs, routers,
concentrators, IP telephony and traditional PBX switching systems. |
| Certifications & Standards |
UL1778 (USA), cUL (Canada), FCC Class A
(emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41
specifications |
|
| Standard Warranty |
2 Year(s) |
In Stock
INTERNATIONAL GROUND SHIPPING: 
