Product Description:
|
| Manufacturer |
Adtran |
| Manufacturer Part Number |
1200185L3 |
| Manufacturer Website Address |
www.adtran.com |
| Product Line |
Atlas |
| Product Name |
Atlas 800 Series T1/PRI Module |
| Marketing Information |
The Quad T1/PRI module combines with other ATLAS
components to implement a variety of WAN access products, including a
T1 Bandwidth Manager, an ISDN Access Switch, and a Digital Access
Cross-connect System (DACS). The module provides four network ports,
each of which can be independently configured to operate in T1 (DS-1 or
DSX-1) or Primary Rate ISDN (PRI) modes.
The Quad T1/PRI module can perform T1- to-PRI conversion, translating
between the robbed-bit signaling presented in a channelized T1 circuit
and the D-channel signaling of a PRI circuit. When using the Quad
T1/PRI module, ATLAS operates in a DACS mode supporting DS0 time slot
interchange and DS0 grooming while preserving robbed bit signaling.
ATLAS can be fully populated with Quad T1/PRI modules to support a pure
DACSing application of 34 T1 circuits.
Configuration of the Quad T1/PRI module can be accomplished through a
variety of mechanisms, including Telnet or VT100 emulation. SNMP
management is supported
for alarm and event reporting.
Extensive T1 circuit monitoring is standard with the Quad T1/PRI
module, including the ability to detect, store, and report all
performance parameters specified in AT&T Technical Reference 54016.
The module detects and reports alarm conditions associated with the
circuit, including Loss of Signal, Red Alarm, Blue Alarm, Yellow Alarm,
and for PRI circuits, D-Channel Synchronization.
The Quad T1/PRI module responds to standard loopback commands from the
telephone company central office - both in-band commands and those sent
through the Facilities Data Link. In addition, local and remote
loopbacks (both line and payload) can be initiated from ATLAS. When
testing the T1 circuit, the Quad T1/PRI module allows the user to
select from a variety of test patterns, including all 1s, all 0s, and a
standard QRSS pattern. When sending the QRSS pattern, the Quad T1/PRI
module records and reports the results of the testing to the user. |
| Product Type |
T1/PRI Module |
|
| Interfaces/Ports |
4 x RJ-48C LAN |
| Interfaces/Ports Details |
4 x RJ-48C DSX |
|
| Connectivity Media |
ISDN PRI T1 |
| Supported Distance |
6000 ft DS-1
655 ft DSX-1
|
| Data Transfer Rate |
1.544Mbps T1 |
|
| Management |
Configuration of the Quad T1/PRI module can be accomplished
through a variety of mechanisms, including Telnet or VT100 emulation.
SNMP management is supported for alarm and event reporting.
|
| Protocols |
ISDN
HDLC
SNMP
|
|
| Power Consumption |
6.5 W |
|
| Temperature |
32 °F (0 °C) to 113 °F (45 °C) Operating
-4 °F (-20 °C) to 158 °F (70 °C) Storage
|
| Humidity |
Up to 95% Non-condensing Relative Humidity |
|
| Form Factor |
Plug-in Module |
| Shipping Dimensions |
5.00" Height x 9.25" Width x 16.25" Depth |
| Shipping Weight |
2.40 lb |
|
| Package Contents |
Four RJ-48 to RJ-48 cables (15 feet)
Two RJ-48 to RJ-48 crossover cables (15 feet)
Two RJ-48 to DB-15 adapters
User manual
|
| Additional Information |
Four T1/PRI interfaces
Built-in CSUs
Configurable for DS-1, PRI, or DSX-1 operation
Maximum distance 6,000 ft
AT&T 54016, 62411 and ANSI T1.403 compliant
D4 and ESF framing formats
AMI and B8ZS line coding
D-Channel to robbed bit signaling conversion
ESF performance monitoring
Local and remote loopback support
Generates and detects QRSS test pattern
Compliant with Lucent 4ESS/5ESS, Nortel DMS100 and National
ISDN
Lightning protection
Occupies a single slot in the ATLAS 800 series chassis
Hot swappable
Framing: D4, ESF
Line Coding: AMI, B8ZS
LBO: 0, 7.5, 15, 22.5 dB; 266, 399, 533, 655 feet
System Timing: Network, Internal, External
T1 Signaling Methods:- E&M Immediate, E&M Wink,
Ground Start, Loop Start, Feature Group D
Conversion:- Robbed Bit Signaling to ISDN D-Channel, AMI to
B8ZS, D4 to ESF
Switch Compatibility: PRI Mode: Lucent 4ESS/5ESS, Nortel
DMS-100, National ISDN
Switch Emulation: PRI Mode: Lucent 4ESS/5ESS, Nortel DMS-100,
National ISDN
Test Patterns: QRSS, All 1s, All 0s
Alarms: Loss of Signal, Red, Yellow, Blue, D-Channel
Performance Monitoring: ES, BES, SES, SEFS, LOFC, CSS, UAS,
LCV, PCV, LES
Signal Monitoring: AB signaling bits for all DS0s, individual
monitor jacks for each port
Diagnostics:
Local Loopback - Line and Payload
Remote Loopback - Line and Payload
|
| Compatibility |
ATLAS 800 series chassis
Switch Compatibility:
PRI Mode: Lucent 4ESS/5ESS, Nortel DMS-100, National ISDN
|
| Certifications & Standards |
FCC Part 15, Class A 1950
UL 1950
Canadian UL (CUL)
|
|
In Stock
INTERNATIONAL GROUND SHIPPING: 
