NeutronCanada.com

Tripp Lite's SMART 700HG offers medical-grade UPS protection with built-in line interactive voltage regulation, intelligent monitoring and unattended shutdown capability. UL 60601-1 listed as medical electrical equipment with less than 300 microamps leakage current for the UPS and all connected equipment. Built-in isolation transformer with faraday shield removes common mode noise while maintaining full AC surge suppression in all modes. Resistant to electrostatic discharge. Includes high quality hospital-grade plug and outlets. 700VA power handling capacity supports computers, internetworking equipment and other critical loads during commercial power failures. Line interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143 back to normal 120V levels, saving battery reserves for use only during complete power failures. Includes 4 outlets, diagnostic LEDs and built-in USB & RS-232 communications ports that work with downloadable PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.

Features:

Ideal UPS protection for applications in medical patient-care areas where UL 60601-1 listed medical electrical equipment is required
Maintains less than 300 microamps leakage current for UPS and all connected equipment
Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power
Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
Full line isolation offers a higher degree of safety and prevents operational problems in sensitive electronic equipment
Resistant to electrostatic discharge
Supports loads up to 700VA / 450 watts
42 minutes half load runtime (with 350VA load), 18 minutes full load runtime (with 700VA load)
4 protected hospital-grade outlets; 6-ft. cord
RS-232 and USB monitoring ports for remote monitoring and unattended shutdown
PowerAlert unattended shutdown software available via free download from www.tripplite.com (cabling included)
Complete surge protection, line isolation and EMI/RFI noise filtering
2 year product warranty
5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
Battery replacement door
Grounding lug

Typical Applications:

UL 60601-1 listed UPS provides ultimate safety and reliability for patient point of care solutions, telemedicine, nurse's stations, wireless communications systems, electronic prescribing applications, medical imaging and mission critical equipment. Not recommended for life support applications.

Specifications:

SYSTEM OVERVIEW
System overview:	Medical Grade tower line interactive UPS system includes built in isolation transformer with faraday shield and line interactive voltage regulation, AC surge suppression, RS-232 and USB monitoring ports with complete cabling, plus hospital-grade plug and outlets. UL2601-1 listed as medical electrical equipment with less than 300 microamps cumulative leakage current for UPS and connected loads.
Voltage compatibility:	120V AC
Frequency compatibility:	60 Hz
OUTPUT
Output volt amp capacity (VA):	700
Output watt capacity (watts):	450
Output nominal voltage:	120V AC
Output voltage regulation:	LINE MODE: Sine wave line voltage 120V (-18% / +8%) BATTERY MODE: PWM sine wave output 120V +/-5%
Output frequency regulation:	LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz
Outlet quantity / type:	4 NEMA 5-15R HG
Overload protection:	Resettable circuit breaker
INPUT
Maximum input amps:	5.5A / 550 watts
Input connection type:	NEMA 5-15P HG
Input cord length:	6 ft., 14 gauge
Recommended electrical service:	15A 120V
BATTERY
Full load runtime:	18 minutes (700VA)
Half load runtime:	42 minutes (350VA)
DC system voltage:	36V DC
Typical battery lifespan:	3-6 years, depending on usage
Battery recharge rate:	2-4 hours to 90%
VOLTAGE REGULATION
Voltage regulation description:	Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable, computer grade output without consuming battery power over an input voltage range of 81 to 143V AC.
Overvoltage correction:	Input voltages between 126 and 143V AC are reduced by 9%
Direct pass through:	Input voltages between 105 and 125V AC are passed through unchanged
Brownout correction:	Input voltages between 96 and 106V AC are boosted by 10%
Severe brownout correction:	Input voltages between 81 and 95V AC are boosted by 21%
LEDS ALARMS & SWITCHES
Front panel LEDs:	Yes, includes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning
Alarms:	3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone)
Switches:	Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions
SURGE / NOISE SUPPRESSION
AC surge suppression:	480 joules
AC suppression response time:	Instantaneous
EMI / RFI AC noise suppression:	Yes
PHYSICAL
Shipping weight (lbs):	48
Shipping weight (kg):	21.8
Unit weight (lbs):	44.6
Unit weight (kg):	20.2
Unit Dimensions (HWD/in):	12.75 x 7.5 x 9
Unit Dimensions (HWD/cm):	32.4 x 19.1 x 22.9
Material of construction:	PVC
Form factors supported:	Tower
Cooling method:	Cooling via rear-exit cooling fan
Battery Access:	Battery access door allows hot swap battery replacement without powering connected equipment off
ENVIRONMENTAL
Operating Temperature:	+32 to +104 degrees Fahrenheit 0 to +40 degrees Celsius
Storage Temperature:	+5 to +122 degrees Fahrenheit -15 to +50 degrees Celsius
Relative Humidity:	0 to 95%, non-condensing
COMMUNICATIONS
Network monitoring port:	Includes 2 built-in monitoring ports, 1-USB & 1-RS232
Software and cabling included:	PowerAlert UPS monitoring software is available via free download from www.tripplite.com for all common network and standalone operating systems. Ships with 2 cables, 1-USB to USB & 1-DB9 to DB9
LINE / BATTERY TRANSFER
Transfer time from line power to battery mode:	2-4 milliseconds
Low voltage transfer to battery power:	81V (resets to line power as voltage increases to 85V)
High voltage transfer to battery power:	143V (resets to line power as voltage decreases to 139V)
CERTIFICATIONS
Certifications:	UL1778 (USA, Series AGSM700PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions)
WARRANTY
Optional coverage:	3 year, 5 year, next day and on-site warranty coverage available in many areas - contact Tripp Lite
Product warranty:	2 year product warranty
SPECIAL FEATURES
Cold Start:	Yes, inverter can be "cold started" to enable temporary AC output during a power failure
Appearance:	Attractive gray tower UPS