Product Description:
Device networking is what powers M2M (machine to machine)
communication. The UDS family of external device servers enables users
to connect, manage and control just about any piece of equipment with a
serial port from virtually anywhere over Ethernet or the Internet.
With the UDS1100, virtually any piece of equipment can be added to
an Ethernet network in a matter of minutes! This single-port external
device server is a quick, simple and inexpensive way to bring the
advantages of remote management to equipment not currently connected to
a network.
- Network virtually any device in minutes
- Access, monitor and control equipment over Ethernet
- Replace dedicated PCs and/or modem lines with fast and reliable
Ethernet networking
- Configure quickly and easily via HTTP, DHCP, Telnet, serial or
Lantronix DeviceInstaller? utility
- Supports RS232, RS422 and RS485 communications
- Environmentally-friendly RoHS and WEEE compliant
- Small enough to place almost anywhere
- Features TruPort® Com port control technology (also see
UDS2100)
- Power over Ethernet (PoE) model available
Serial Interface |
Interface |
Software-selectable RS232,
RS422 or RS485 (2 and 4 wire support) |
Connectors |
1 DB25F DCE serial port |
Data Rates |
Software-selectable baud rate from 300 to
230 KBaud |
Serial Line Format |
Characters |
7 or 8 data bits |
Parity |
odd, even, none |
Stop Bits |
1 or 2 |
Flow Control |
Control Signals |
CTS/RTS (Hardware) |
Flow Control |
XON/XOFF (Software) |
Network Interface |
Interface |
10Base-T/100Base-TX Ethernet port |
- Software selectable Ethernet speed 10/100/Auto
- Software selectable Half/Full/Auto duplex
|
Connector |
RJ45 |
Standards |
ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP,
DHCP, HTTP, SNMP TCP, UDP, and Telnet, TFTP |
Indicators (LED) |
- Power, 10/100 Link/Activity (green)
- 100/100 Link/Activity (green)
- Diagnostics (red)
- Status (green)
|
Processor |
CPU |
Lantronix DSTNI-EX 48 MHz clock |
Memory |
256 KB zero wait state SRAM, 2 MB Flash |
Management |
- Lantronix DeviceInstaller GUI, Serial login, SNMP, Telnet
login, HTTP
|
Power |
UDS1100
- 9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum
consumption)
- 9-30 VDC on DB25F serial interface
UDS1100-PoE
- Powered over Ethernet via 802.3AF compliant power source
|
Environmental |
Operating |
0° to 60° C (32° to 140° F) |
Storage |
-40° to 85° C (-40 to 185° F) |
Agency Approvals |
- UL, CSA, FCC, CE, TUV, CTick, VCCI
|
Software |
- Windows® 98/ME/NT/2000/XP-based DeviceInstaller
configuration software, Com Port Redirector? software and related
utilities
|
Packaging |
Material |
Metal enclosure with integrated wall
mounts; optional 35 mm DIN-rail mount available |
Dimensions (LxWxH) |
9.0 x 6.4 x 2.3 cm (3.5 x 2.5 x 0.9 in) |
IP Rating |
30 |
Emissions |
FCC Part 15 Subpart B
Class A |
Radiated Emissions 30MHz
? 1000MHz |
ICES-003 Issue 4 February 2004 Class
A |
Radiated Emissions 30MHz ? 1000MHz |
AS/NZS CISPR 22: 2004 Class A |
Radiated Emissions 30MHz ? 1000MHz |
EN55022: 1998 + A1: 2000 + A2: 2003
Class A |
Radiated Emissions 30MHz ? 1000MHz |
VCCI V-3/2005.04 Class A |
Radiated Emissions 30MHz ? 1000MHz |
EN61000-3-2: 2000 Class A |
Harmonic Current Emissions |
EN61000-3-3: 1995 + A1: 2001 |
Fluctuations and Flicker |
|
Immunity |
EN55024: 1998 |
+A1: 2001 +A2: 2003 |
IEC_61000-4-2: 1995 |
ESD 8kV Air Discharge (Direct), 4kV
Contact Discharge (Direct/Indirect) |
IEC_61000-4-3: 1995 |
Radiated Immunity 3.0V/m, 1KHz AM
Sine Wave at 80% |
IEC_61000-4-4: 1995 |
EFT/Burst 1.0kV Power Lines, 0.5kV
I/O Lines |
IEC_61000-4-5: 1995 |
Surge Immunity 1.0kV Common Mode, 1.0
kV Differential Mode |
IEC_61000-4-6: 1996 |
Conducted Immunity 3.0 Vrms, 80% AM
Modulated (1KHz) |
IEC_61000-4-8: 1993 |
Magnetic Field Immunity 50Hz 1.0
Arms/m |
IEC_61000-4-11: 1994 |
Voltage Dips and Interrupts
(>95%,0.5 periods), (30%,25 periods), (>95%,250 periods) |
|
Isolation |
- Designed with protection against transients and ESD for use
under harsh environments.
|
Serial Port |
15 kV ESD protection on RS232 and RS422/485
transceivers |
Power Input |
Up to non-repeated 600 W 10/100 usec pulse
protection against transient over voltages |
Ethernet Port |
1500 VAC isolation shielded with shield
connected to chassis ground for signal integrity and ESD protection |
|