Product Description:
The AMAX-2750 Series consists of digital slave modules for AMONet.
RS-485 that extend the digital I/O capacity. All the DIO slave
extension modules are connected serially with a simple Cat.5 cable.
This reduces wiring between driver and controller and is very suitable
for highly integrated machine automation applications. High speed,
scalability and cost effectiveness ensures a solid solution for machine
builders. There are 3 main types of DI/O slave modules, 32In, 32Out,
and 16In/16Out. With these slave modules, you can connect
actuators/sensors directly with minimum hassle. You can access I/O
points nearby or 100 meters away using simple and low-cost wiring, and
the high speed of AMONet RS-485 makes it possible to scan 2048 IO
channels in 1.04 ms.
- Max. 20 Mbps transfer rate
- Onboard terminal for direct wiring
- Easy installation with RJ45 phone jack and LED diagnostic
- LED indicator for each IO channel (Switch by SW4)
- Selection of I/O-channel configuration (32 DI, 32 DO or 16/16
DI/O)
- 2500 Vrms Isolation voltage
- Suitable for DIN-rail mounting
General |
Connectors |
2 x 40-pin
Terminal |
Isolated DI/O |
Input Channels |
- |
Input Range |
- |
Input Isoloation Voltage |
- |
Output Channels |
32 |
Output Max.Sink Current |
150mA |
Output Range |
5 ~ 30 VDC |
Output Isoloation Voltage |
2500 VDC |
|