Product Description:
The AMAX-2750 Series
consists of digital slave modules for AMONet. RS-485 that extend the
digital I/O capacity. All the DIO slave extension modules are connected
serially with a simple Cat.5 cable. This reduces wiring between driver
and controller and is very suitable for highly integrated machine
automation applications. High speed, scalability and cost effectiveness
ensures a solid solution for machine builders. There are 3 main types
of DI/O slave modules, 32In, 32Out, and 16In/16Out. With these slave
modules, you can connect actuators/sensors directly with minimum
hassle. You can access I/O points nearby or 100 meters away using
simple and low-cost wiring, and the high speed of AMONet RS-485 makes
it possible to scan 2048 IO channels in 1.04 ms.
- Max. 20 Mbps transfer rate
- Onboard terminal for direct wiring
- Easy installation with RJ45 phone jack and LED diagnostic
- LED indicator for each IO channel (Switch by SW4)
- Selection of I/O-channel configuration (32 DI, 32 DO or 16/16
DI/O)
- 2500 Vrms Isolation voltage
- Suitable for DIN-rail mounting
| General |
Connectors |
2 x 40-pin
Terminal |
| Isolated DI/O |
Input Channels |
32 |
| Input Range |
Dry Contact |
| Input Isoloation Voltage |
2,500 VDC |
| Output Channels |
- |
| Output Max.Sink Current |
- |
| Output Range |
- |
| Output Isoloation Voltage |
- |
|
INTERNATIONAL GROUND SHIPPING: 
